Ricoh Aficio MP C2500 EFI Troubleshooting Manual page 68

Troubleshooting When Using the Printer Function
Problem
Images are cut
off, or excess is
printed.
Page layout is
not as expected.
4
Photo images are
coarse.
Solid lines are
printed as bro-
ken lines.
Optional compo-
nents connected
to the machine
are not recog-
nized when us-
ing Windows 95
/ 98 / Me, Win-
dows 2000 / XP,
Windows Server
2003, and Win-
dows NT 4.0.
Duplex printing
is malfunction-
ing.
Duplex printing
is malfunction-
ing.
60
Cause Solution
You may be us- Use the same size paper as that selected in the applica-
ing paper small- tion. If you cannot load paper of the correct size, use the
er than the size reduction function to reduce the image, and then print.
selected in the See the printer driver Help.
application.
Print areas differ Adjust the [Printable area:] setting in the [Printer Configura-
depending on tion...] dialog box on the [Print Settings] tab in the RPCS
machine used. printer driver. See the printer driver Help.
Information that
fits on a single
page on one ma-
chine may not fit
on a single page
of another ma-
chine.
Some applica- Use the application's settings to specify a higher resolu-
tions print at tion.
lower resolution.
Dither patterns Make the following settings with the printer driver:
do not match. Change the [Dithering:] setting on the [Image Adjustments]
tab in the [Change User Settings...] dialog box, on the [Print
Quality] tab in the RPCS printer driver. See the printer
driver Help.
Bidirectional Set up optional devices on the Properties of the printer.
communication
See the printer driver Help.
is not working.
Duplex printing When using duplex printing, make settings to use paper
cannot be done from a tray other than the bypass tray.
with paper set in
the bypass tray.
The upper tray Specify a another output tray.
cannot be used as
an output desti-
nation in duplex
mode.