Inspection And Unpacking; Equipment Inspection; Packing Material; Handling - Emerson Liebert CRV User Manual

3.0 I
NSPECTION AND
WARNING
!
Risk of top-heavy unit falling over. Can cause equipment damage, personal injury and death.
Read all of the following instructions before attempting to move, lift or remove packaging
from the Liebert CRV.
CAUTION
!
Risk of sharp edges, splinters and exposed fasteners. Can cause personal injury.
Only properly trained and qualified personnel wearing appropriate safety headgear, gloves,
shoes and glasses should attempt to move, lift or remove packaging from the Liebert CRV or
prepare the unit for installation.
NOTICE
Risk of overhead interference. Can cause unit and/or building damage.
The unit may be too tall to fit through a doorway while on the skid. Measure the unit and
doorway heights and refer to the installation plans prior to moving the unit to verify
clearances.
NOTICE
Risk of improper storage. Can cause unit damage.
Keep the unit upright, indoors and protected from dampness, freezing temperatures and
contact damage.
3.1

Equipment Inspection

After the Liebert CRV unit arrives and before it is unpacked, verify that the delivered equipment
matches the bill of lading. Examine the packaging for any signs of mishandling or damage. Inspect all
items for damage, visible or concealed. Report any damage immediately to the carrier and file a
damage claim. Send a copy of the claim to Emerson Network Power or your Emerson representative.
3.1.1

Packing Material

All material used to package this unit is recyclable. Please save this material for future
use or dispose of it appropriately.
3.2

Handling

Figure 7 Liebert CRV center of gravity
® ™
Liebert CRV
U
NPACKING
Y
Z
X
8

Inspection and Unpacking

R