Figure 40 Rack Setup Screen, Page 3 Of 3; Figure 41 Rack Overview Screen - Emerson Liebert CRV User Manual

Figure 40 Rack setup screen, page 3 of 3

Once a sensor has been assigned to either control or display its temperature data, a custom label can
be assigned to the sensor. This step is not required for the sensor to operate but does provide a logical
name for identification. Navigate using the arrow and enter keys to highlight the Assign Names
number range. Once the range is selected then press the Enter key to move to the rack location blocks
at the bottom of the screen. The Up and Down arrow keys can be used to select any alpha or numeric
value up to four positions.

Figure 41 Rack overview screen

If the Rack Setup menus are configured in the Service menu to locate and label the remote rack
sensors, then the Rack View in the User menu should look similar to the screen above. This screen
will show the node number at the top of each block, the label and the actual temperature that each
sensor is currently measuring.
® ™
Liebert CRV
Rack Setup (page 3 of 3)
Liebert CRV = CRV
No Sensors = NoS
No rack = [blank]
Sensor Note = 01-10
01 00 02 00 03
DC01 DC03 DC05
Cold Aisle
DD04 CRV
DD02
00 07 00 08 CRV
Use the navigation keys to move from rack to rack,
Enter to select a rack, and up- or down keys to
scroll through options.
Rack Overview (page 1 of 1)
01 02 03
RAC1 EMAL BLAD
71.4 72.8 69.4
Cold Aisle
72.4 70.8 69.3
06KW DISC CRV1
07 08 CRV
All temperatures shown in °F
UNIT 01
Assign Names: 01-06
07-12
13-18
19-22
00 04 00 05 00 06
DC07 DC09 DC11
00 00 00 00 00
UNIT 01
04 05 06
RAC4 DC07 RAC6
70.1 74.5 71.0
50
00
Startup