Table of Contents
Advertisement
Solving Print Quality Problems
Table 5.3
Problem
Light/faint prints
Overall image is lighter
than normal.
Downloaded from
www.Manualslib.com
Print Quality Problems
Possible Cause(s)
Toner Saver mode.
Toner level low/empty.
Damp paper stock.
manuals search engine
If you have any problems with your printer's printed
output, refer to Table 5.3 for suggested remedies.
The cases listed in Table 5.3 are probable cases only, and may
not represent all of the possible cases which may occur under
actual operating conditions. If you experience a problem which
does not seem to fall under any of the cases listed in this table,
or if you are concerned about any other aspect of printer
operation, contact your service provider.
Turn off Toner Saver.
Remove the laser print cartridge carefully
and vigorously shake it several times, then
reinstall it. (This may help redistribute the
remaining toner before having to replace
the cartridge.)
Replace paper stock.
Solving Print Quality Problems
Corrective Action(s)
Table 5.3 Page 1 of 8
Chapter 5: Troubleshooting
5-29
Advertisement
Table of Contents
Troubleshooting
