Table of Contents
Advertisement
Paper Jams
Jam Scenario 2
Control Panel Message
Exit Jam-
Open Rear Cover
Clear Paper Path
5-10
User Guide
Downloaded from
www.Manualslib.com
A paper jam has occurred at the exit path to the output
bin.
manuals search engine
Corrective Action
1
Go behind the printer, squeeze
the latch on the top left of the
rear cover and pull the cover
open.
Remove any jammed paper.
2
Be careful not to touch
the fuser. It becomes
very hot from printing.
3
Close the printer's rear cover.
4
Check the Control Panel display.
If the jam has been cleared and
all covers are closed, the display
will show Ready. If a paper jam
message remains, there is still
paper jammed in the printer.
Refer to Table 5.1 on page 5-6 for
instructions.
Advertisement
Table of Contents
Troubleshooting
