Xerox N2125A/DT - DocuPrint B/W Laser Printer User Manual page 89

Table 3.6
Menu
Tray Menu
(continued)
Downloaded from www.Manualslib.com
Control Panel Menu Options (continued)
Tray Sequence
Custom Size
Tray N Mode
Config Fuser
Plain
Preprinted
Letterhead
manuals search engine
Description
Groups two or more trays together so the group appears as
one logical tray, and defines the order in which the trays will
be searched to satisfy the input request.
Defines the paper size that is used in formatting pages
printed from the tray(s) if Tray N Mode is set to Custom
(which overrides the tray's auto size detection mechanism).
Determines whether or not the auto size detection
mechanism in tray N (where N is the tray number—Tray 1, 2,
or 3) should be overridden with the setting for Custom Size.
Enables the customization of fuser temperature settings
associated with each paper type (otherwise set automatically
by the printer). When set to On, each paper type is available
as a menu item to customize its fuser temperature.
Sets the fuser temperature to be associated with the paper
type Plain (appears only if Config Fuser is set to On).
Sets the fuser temperature to be associated with the paper
type Preprinted (appears only if Config Fuser is set to On).
Sets the fuser temperature to be associated with the paper
type Letterhead (appears only if Config Fuser is set to On).
Using the Control Panel
Table 3.6 Page 2 of 14
Chapter 3: Printing 3-45