Table of Contents
Advertisement
Using the PostScript Driver
Graphics Options
3-30
User Guide
Downloaded from
www.Manualslib.com
Watermarks
Use this feature when you want your output to contain
background text, independent of that provided by the
printing application, across the first page or every page of
a document. The driver enables you to specify the text, its
font, size, position on the page and rotation angle, when
creating and saving a unique watermark for use on any
document. You may also select a default watermark from a
list of predefined watermarks.
When you select this tab, you can set the various graphics
options for the driver.
Brightness
This slider control increases or decreases the brightness
level of the image. You can also enter a value, and the
slider will adjust itself to match the value typed. The
default setting is zero.
Scaling
This slider control makes the page image smaller or larger
by adjusting the percentage from 25% to 400%. The
default is 100%. The image is anchored in the upper left
corner of the paper. If you enlarge the image, the driver
clips the right side and the bottom of the image to the size
of the paper on which the image is to be printed. If you
shrink the image, there will be white space on the right
side and bottom. You can also enter a value, and the slider
will adjust itself to match the value typed.
manuals search engine
Advertisement
Table of Contents
Troubleshooting
