Xerox N2125A/DT - DocuPrint B/W Laser Printer User Manual page 141

Table 5.2
Problem
PostScript commands
are printed instead of
the PostScript job.
Downloaded from www.Manualslib.com
Printer Operation Problems (continued)
Action
• Make certain that the software application you are using to create your job is
configured properly. Refer to your software documentation.
• The job sent to the printer might have included an incorrect header, and
therefore, not have indicated that a PostScript job was being sent.
- Check your software to make sure the PostScript header file is being sent
to the printer.
• Set the Print Errors item in the PostScript Menu to
- If an error page prints, there is a problem in the PostScript coding. Correct
the coding problem and resend the job. Asking for features not available
can cause a configuration error.
- If the job still does not print and an error page was not printed, the job
may require additional memory.
manuals search engine
Solving Printing Problems
On and resend the job.
Table 5.2 Page 3 of 4
Chapter 5: Troubleshooting 5-27