Associated Information - TRENDnet TEW-715APO User Manual

TRENDnet User's Guide
System Information
• Device Name: Name of device
• Country/Region: Applied country/region
• Firmware Version: Current firmware version of the access point.
WAN Settings
Information is based on the mode settings applied to the access point and when System
mode is to Router.
• Connection Time: Display time duration of when the WAN has established
connection
• Access Type: Display the WAN connection type
• IP Address: Current assigned WAN IP address
• Subnet Mask: Assigned WAN Subnet Mask
• Default Gateway: Assigned WAN default gateway
• DNS1/2: Assigned WAN DNS IP address
• MAC Address: Displays the MAC address of the access points WAN port
© Copyright 2012 TRENDnet. All Rights Reserved.
LAN Settings
Information is based on the Wireless mode setting applied to the access pointr.
• IP Address: LAN IP address of your access point
• Subnet Mask: Subnet Mask of your Local Area Network (LAN)
• MAC Address: Displays the MAC address of your access points Local Area
Network (LAN)
• Connection Time: Display time duration of when the WAN has established
connection
• Access Type: Display the WAN connection type
• IP Address: Current assigned WAN IP address
• Subnet Mask: Assigned WAN Subnet Mask
• Default Gateway: Assigned WAN default gateway
• DNS1/2: Assigned WAN DNS IP address
MAC Address:
• elect from the pull down menu the certificate would like to delete and deactivate.
Press Delete to proceed.

Associated Information

Status > Connections
Open "Connections" in "Status" to check the information of associated wireless devices
such as MAC address, signal strength, connection time, IP address, etc. All is read only.
Click "Refresh" at the bottom to update the current association list. By clicking on the
MAC address of the selected device on the web you may see more details including
device name, connection time, signal strength, noise floor, ACK timeout, link quality, IP
information, current data rate, current TX/RX packets.
TEW-715APO
46