Router Mode - TRENDnet TEW-715APO User Manual

TRENDnet User's Guide

Router Mode

Below describes the configuration settings when the TEW-715APO System Mode is set
to Router. In this configuration the Ethernet port of the TEW-715APO can serve as the
WAN (Wide Area Network) or Internet port. Please verify your network configuration
when using this mode. Please refer to
help determine your Internet settings.
Configuration
1. Log into the management page (see
2. Your access point will prompt you for a user name and password.
3. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
4. Click the System button on the left side and then System Settings.
5. Select Router in the System Mode drop down menu.
6. Select your country in the Country/Region pull down menu and click Apply button to
save your setting.
© Copyright 2012 TRENDnet. All Rights Reserved.
Internet Service Types section in the Appendix to
"Access the management page" on page 9).
7. Click the Wireless button on the left side and then Basic Settings.
8. Select the mode you would like to apply Operation Mode pull down menu. Click
Apply to save changes.
• AP Mode:
Creates a wireless network with your device (similar to a wireless
router). Device Ethernet port serves as a WAN (Wide Area Network) or Internet
port.
•
Wireless Client: Connects to any existing wireless network (similar to a wireless
adapter) in which the wireless network the device is connecting to serves as your
Internet connection. Ethernet port serves as a LAN (Local Area Network) port of
the device and the wireless settings is based on your ISP (Internet Service
Provider) connection.
•
Bridge: Creates a wireless network with your device (similar to a wireless router).
Device Ethernet port serves as a WAN (Wide Area Network) or Internet port.
•
AP Repeater: Creates a wireless network with your device (similar to a wireless
router). Device Ethernet port serves as a WAN (Wide Area Network) or Internet
port.
TEW-715APO
20