Ap Mode - TRENDnet TEW-715APO User Manual

TRENDnet User's Guide

AP Mode

Wireless > Basic
When AP mode is selected a wireless network is created with your device (similar to w
wireless router). Device Ethernet port serves as a WAN (Wide Area Network) or Internet
port. This section outlines available management options when the device System
Setting is set to Router and the wireless Operation Mode is set to AP. Click Apply to
save any changes.
© Copyright 2012 TRENDnet. All Rights Reserved.
• Disable Wireless LAN Interface:
o Check/Off: turns off wireless networking on your router.
o Unchecked/On: turns on the wireless networking on your router (by default
it is enabled).
Note: It is recommended to leave the wireless setting to On unless you do not plan
on connecting any wireless computers or devices to your network.
• Operation Mode: Select the mode you want the access point to operate in.
o AP: refer to pagexxxx for additional information.
o Wireless Client: refer to page xxx for additional information
o Bridge: refer to page xxx for additional information
o AP Repeater: refer to page xxx for additional information to operate the
device as an access point.
• Wireless Network Name (SSID): This acronym stands for Service Set Identifier
and is the name of your wireless network. It differentiates your wireless network
from others around you. By default, the access point broadcast TRENDnet715 as
TEW-715APO
21