TRENDnet TEW-715APO User Manual page 16

TRENDnet User's Guide
some cases, however, like where there is no great demand for speed, you can
have a relatively-low transmit rate for compromise of a long distance.
• Extension Channel Protection: This is to avoid conflict with other wireless
network and boost the ability of your device to catch all 802.11g transmissions.
However, it may decrease wireless network performance. Compared to CTS-Self;
the transmission amount of CTS-RTS is much lower.
• Enable MAC Clone: Available only under wireless client mode, it hides the MAC
address of the AP while displays the one of associated wireless client or the MAC
address designated manually.
Site Survey:
The following section outlines how to utilize the site survey option in Wireless Client
mode.
1. Log into the management page (see
2. Click on Wireless button and click on Basic Settings.
3. Select Wireless Client in the Operation Mode pull down menu and click Apply.
4. Click Site Survey button.
5. The access point will automatically scan for available access points.
6. Select the access point or wireless network you want to connect.
7. Click either Select AP , Select SSID or Scan option.
• Select AP: Configures the access point based on the selected AP's SSID and MAC
address
• Select SSID: Configures the access point based on the selected AP's SSID only
• Scan: Scans for available wireless networks.
© Copyright 2012 TRENDnet. All Rights Reserved.
"Access the management page" on page 27).
8. Click Apply when you have selected the wireless network you want to connect with.
9. If your wireless network is configured with wireless security, click Profile Settings
• Profile Name: Enter the profile name you would like to assign to the wireless
network.
• Wireless Network Name (SSID): Name of the wireless network you are
connecting too.
• WWM Support: Is a subset of 802.11e. It allows wireless communication to
define a priority limit on the basis of data type under AP mode only, thus those
time-sensitive data, like video/audio data, may own a higher priority than
common one. To enable WMM, the wireless client should also support it
• Security Settings: Select and configure the wireless security of your wireless
network. Click Apply to save settings. Please refer to Wireless Encryption Type
section on pagexxx
TEW-715APO
15