Using The Optional External Antenna; Pole Mounting - TRENDnet TEW-715APO User Manual

N150 wireless outdoor poe access point

Hide thumbs Also See for TEW-715APO:

Table of Contents

TRENDnet User's Guide

Using the optional external antenna

The access point offers the use of an optional external antenna. This allows you to use

an Omni-Type antenna instead of the built in directional antenna.

Note: When using the optional external antenna, you must just the antenna settings on

the access point to External N-Type. Please refer to the operation mode types you are

using for additional information.

1. Remove the black rubber cap off the access point.

2. Connect and fasten tightly your N-Type antenna connector to the access point.

The access point comes with a pole mounting clamp that allows you to mount the

device to a pole.

Note: The mounting clamp supports up to 63mm diameter.

1. Loosen the pole mounting clamp by turn the bolt in of the clamp counter clock

wise

2. Insert one end of the clamp through the back (center section) of the access

point.

3. Align the access point to the pole and tighten up the clamp till the access point

is secured on the pole.

TEW-715APO

Table of Contents