Installation Instruction; Installation Of Power Supply - Gigabyte GZ-FW1CA-AJS User Manual

4. Installation
Instruction
Please follow the reference
sections in order for installation
4-1 Installation of Power
Supply
To facilitate the installation, it is recom-
mended to set the chassis upright on the
table.
Required Tools: power supply securing
screw x 4
4-1-1 Remove the thumb screws of the
left side panel and detach the left panel
by unlatching the side panel.
4-1-2 Remove the thumb screws of the
power supply retainer plate at the back
of the chassis and remove.
4-1-3 Secure the power supply onto
the retainer plate, by using the 4 fixed
screws.
4-1-4 Slide in the power supply from the
rear of the chassis.
4-1-5 Use the thumb screws to secure
the power supply retainer plate to the
rear of the chassis.
9