Installation Instructions; Installation Of Power Supply; Installation Of Motherboard - Gigabyte GZ-XX1CA-SNS User Manual

4.Installation Instructions

Please follow the reference sections in order for installation.

4-1 Installation of Power Supply

To facilitate the installation, it is recommended to set the chassis
upright on the table.
Required Tools: Power supply securing screw x 4.
4-1.1 Remove side panel (see step 1-3.1 on page 6).
Place the power supply unit into the case.
4-1.2
Secure the power supply with the 4 securing
screws.

4-2 Installation of Motherboard

This chassis is compatible with ATX / Micro ATX / Flex ATX
motherboards.
Please confirm the dimensions and fixing points of the
motherboard prior to installation.
Required Tools: Copper stand offs, Motherboard screws.
4-2.1
According to motherboard specifications,
select proper screw points, screw in the
copper stand offs into the corresponding
points on the motherboard.
4-2.2
Change the motherboard I/O bracket on the
rear panel (supplied by the motherboard
manufacturer).
8