4-Way Splitter Valve Instruction And User Manual - Gigabyte GZ-FW1CA-AJS User Manual

4-12-5-2 Connect the 3-pin power con-
nector of the fan into the CPU fan socket
on the motherboard (Fig. a: 3-pin CPU
fan socket / Fig. b: 4-pin CPU fan socket
(LGA775))
Fig. a
4-12-6 Pump power Cable Installation.
4-12-6-1 Connect the power SW cord
(female 2-pin) with the "+PW-" jumper
on to the motherboard.
4-12-6-2 Connect the 4-pin connector
from the pump to a 4-pin connector of
the power supply.
20
Fig. b
4-12-7 Adding coolant to the tank.
Please remove the lid on the top of the
chassis and check the coolant level
gauge on the front panel of the chassis.
Fill the tank to 80% full and close the lid.
Turn on the power until all the coolant
drains into the tubes. The system should
shutdown automatically due to the tank
coolant level being too low or empty.
(This is normal as the tubes and radia-
tor are not filled with liquid). Open the
lid again and fill the tank up to 80% full;
repeat this until all tubes and radiator are
filled with coolant and the tank coolant
level is constant at 80% full.
4-13 4-way Splitter Valve
Instruction and User
Manual
Note: Gigabyte Blue Eye and Chipset