Installation Of Front Multi-Media I/O Ports - Gigabyte GZ-FW1CA-AJS User Manual

4-3-2 Remove the internally attached
dust proof PCI cover.
4-3-3 Insert the interface card carefully
into the expansion slot.
4-3-4 Close the PCI slot retention lock
and make sure the card is secured.
4-4 Installation of Front
Multi-Media I/O Ports
Incorrect connection of the slots can cause
the motherboard to malfunction or completely
destroy the motherboard. Please read the
manual carefully during installation as incorrect
installation or connection that causes faults will
void your warranty
The front panel includes
(1) 4 x USB 2.0, 1 x IEEE 1394 and HD
or AC'97 audio jack (depending on
the motherboard)
(2) Basic casing power switch control
cable kit
Required Tools: None
4-4-1 Insert the USB 2.0 connectors into
the corresponding sockets on the moth-
erboard (please refer to the motherboard
user manual for further information).
USB 2.0 connector
Pin Definition Pin
1 Power 6
2 Power 7
3 USB Dx- 8
4 USB Dy- 9
5 USB Dx+ 10 USB Over current
4-4-2 Insert the IEEE 1394 connector
into the corresponding socket on the
motherboard.
Please refer to the instructions supplied
by the motherboard manufacturer and
make sure the correct type of the con-
nector is used prior to installation.
Definition
USB Dy+
GND
GND
13