Installation Of Add On Card - Gigabyte GZ-FW1CA-AJS User Manual

4-2-2 If the motherboard is an LGA775,
please use the back plate and stick it be-
hind the motherboard.
4-2-3 According to the motherboard'
s size specification, select the correct
screw holes and insert the stand offs.
Note: Incorrect installation may cause the
motherboard to short circuit and other
hardware to become faulty or damaged.
4-2-4 Install the motherboard I/O back-
board at the back wall of the case (sup-
plied by the motherboard manufacturer).
12
4-2-5 Use the motherboard screws to
secure the motherboard onto the back
wall of the case (refer to your mother-
board manual to check what type of
motherboard you have).
Motherboard Code name
ATX A1-A9
Mini ATX M1-M9
Micro ATX U1-U9
E-ATX E1-E12
Motherboard Case copper post
screws
9 9
9 9
9 9
12 12
4-3 Installation of Add on
Card
The 3D Mercury does not require any
tools for installation of add-on cards
such as graphics cards and network
cards.
Required Tools: None
4-3-1 Open the PCI slot retention lock.