Liquid Cooling System Maintenance - Gigabyte GZ-FW1CA-AJS User Manual

Fig. C
f. Shake the chassis slightly to get ex-
cess coolant out of the tubes.
g. After all the coolant has been drained
out. It is now safe to transport the
chassis or replace parts that need to
be replaced.
4-14 Liquid Cooling Sys-
tem Maintenance
4-14-1 If If the coolant level is to low,
remove the top lid and, after refilling
coolant, secure the lid back on.
4-14-2 If pump makes strange noises,
please make sure that there is no air
inside the tubes. You will need tools for
this. Please prepare a cross screwdriver
and cloth (to clean the water leaks that
may occur when disconnecting tubes).
a. Please use the above-mentioned
method to drain the coolant from the
chassis.
b. Remove the screws on the top cover
of the chassis, two at the rear and two
on either side of the chassis.
24
c. Remove the lid from the top of the
chassis.
d. Remove the 4 screws that secure the
tank.