4
Installation Instruction
Please follow the reference sections for installation.
4-1 Installation of Power Supply
To facilitate the installation, it is recommended to place the Poseidon chassis upright on the table.
Required tool: Power supply securing screw x 4.
4-2 Installation of Motherboard
The Poseidon is compatible with the ATX/Micro ATX motherboard. Please confi rm the dimension
and specifi cations of the motherboard before installation.
Required tool: motherboard standoffs x 9 and securing screws x 9
Select proper rear I/O panel of the motherboard (typically supplied by motherboard manu-
factures).
4-1-1 Please remove the left side panel before placing the
power supply into the chassis.
4-1-2 Use screws to secure the power supply from the rear
side.
4-2-1 According to motherboard specifi cations, select proper
screw holes, engage the standoffs into the correspond-
ing holes of the chassis.
4-2-2 Secure the motherboard with securing screws.
Motherboard
Code
Motherboard securing screw Standoffs
ATX
A1-A9
MINI ATX
M1-M9
MICRO ATX
U1-U9
FLEX ATX
F1-F6
9
9
9
9
9
9
6
6
9