Installation Of Motherboard - Gigabyte GZ-FW1CA-AJS User Manual

4-1-7f Remove the screws on the liquid
cooling system tray (above the
power supply area and back
panel, total of 5 screws.)
4-1-7g Gently lift the liquid cooling
system tray and insert the power
supply through the rear chassis.
4-1-7h If a longer power supply is used,
please use the extended power
supply retainer plate and secure
with the extended screws.
4-1-7i Reverse the steps to reassemble
the parts
4-2 Installation of Mother-
board
3D Mercury can support ATX / Micro
ATX / Mini ATX / E-ATX / CEB
Please confirm the motherboard screw
holes locations and size specification
before installation
Required Tools: Screwdriver, stand offs,
and the motherboard screws
4-2-1 First remove the CPU water block
from the motherboard tray on the chas-
sis.
11