Network Settings - Hitachi CP-AW250NM Operating Manual

3.3 Network Settings

Displays and congures network settings.
Item
IP Conguration
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default Gateway
Projector Name
sysLocation (SNMP)
sysContact (SNMP)
DNS Server Address
AMX D.D.
(AMX Device Discovery)
Click the [Apply] button to save the settings.
• The new conguration settings are activated after restarting the network connection.
NOTE
When the conguration settings are changed, you must restart the network connection. You can
restart the network connection by clicking the [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
Congures network settings.
Enables DHCP.
Disables DHCP.
Congures the IP address when DHCP is disabled.
Congures the subnet mask when DHCP is disabled.
Congures the default gateway when DHCP is disabled.
Congures the name of the projector.
The length of the Projector Name can be up to 64 alphanumeric
characters. Only alphabets, numbers and following symbols
can be used. !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Particular projector name is pre-assigned by default.
Congures the location to be referred to when using SNMP.
The length of the sysLocation can be up to 255 alphanumeric
characters. Only numbers '0-9' and alphabet 'a-z', 'A-Z' can be used.
Congures the contact information to be referred to when
using SNMP.
The length of the sysContact can be up to 255 alphanumeric
characters. Only numbers '0-9' and alphabet 'a-z', 'A-Z' can be used.
Congures the DNS server address.
Congures the AMX Device Discovery setting to detect the projector
from the controllers of AMX connected to the same network. For the
details of AMX Device Discovery, visit the AMX web site.
URL: http://www.amx.com
Description
3. Web Control
49