Hitachi CP-AW250NM Operating Manual page 71

OPTION menu
Item
SERVICE
(continued)
(continued on next page)
62
RESPONSE LIMIT TIME
Select the time period to wait for receiving
response data from other device communicating by
the NETWORK BRIDGE and the HALF-DUPLEX
through the CONTROL port.
OFF: Select this mode if it is not required to check
COMMUNICATION
(continued)
1s /2s /3s: Select the time period to keep the
• This menu is available only when the NETWORK
BRIDGE is selected for the COMMUNICATION
TYPE and the HALF-DUPLEX is selected for the
TRANSMISSION METHOD (
• OFF is selected as the default setting.
Description
OFF 1s 2s
the responses from the device that the projector
sends data to. In this mode, the projector can
send out data from the computer continuously.
projector waiting for response from the device
that the projector sends data to. While waiting the
response, the projector does not send out any
data from the CONTROL port.
3s
61).