Selecting The Network Connection Method - Hitachi CP-AW250NM Operating Manual

1. Connection to the network

1.5 Selecting the network connection method

There are some options to connect to the
network.
• Enter PassCode
• Congure Manually
• Select From List
Select one of them to meet your requirement.
Enter PassCode
If you want to use the Passcode for network connection, select the [Enter
PassCode] and click the [Next].
The Passcode is given by the projector on screen. And you simply input the
Passcode to the "LiveViewer" to connect the network.
Proceed to item 1.5.1 Passcode connection. (
Congure Manually
Select the [Congure Manually] and click the [Next].
Then, proceed to item 1.6 Manual Conguration. (
Select From List
Before selecting this item, your computer and the projectors need to be connected
to the same network.
If the connection is already established, select the [Select From List].
From the list of the projectors connected to the network, select which projector
you would like to send your images. Proceed to 1.8 Conrming the connection
to your destination. (
14
30)
15)
23)