Using The Cable Cover - Hitachi CP-AW250NM Operating Manual

Using the cable cover

Utilize the cable cover as the guard and blind for the connecting parts.
Connect the signal cables and the power cord to the projector rst.
1.
Combine parts as shown in gure,
2.
and assemble the cable cover.
3 . Insert the three knobs on the cable cover into the three holes on the projector
as shown in the gure. Pass the cables through the holes on the bottom of
the cable cover.
CAUTION ► Be careful not to pinch the cables in the cable cover, to
prevent damage to the cables.
► Use the cable cover that is supplied with the projector. Do not attempt any
modications to the cable cover.
1
1
1
2
3
9
3
3
2
2
knobs
1
3
2