Hitachi CP-AW250NM Operating Manual page 164

3.4 Port Settings (Continued)
Item
SNMP Port
Port open
Trap address
Download MIB le
Network Bridge Port
Port Number
Click the [Apply] button to save the settings.
• The new conguration settings are activated after restarting the
NOTE
network connection. When the conguration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking the [Network Restart] on the main menu.
Congures the SNMP port.
Click the [Enable] check box to use SNMP.
Congures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Downloads a MIB le from the projector.
Congures the Bridge port number.
Input the port number.
Except for 9715, 9716, 9719, 9720, 5900, 5500, 4352
between 1024 and 65535 can be set up. It is set to 9717 as
the default setting.
Description
3. Web Control
51