Network Settings - Hitachi CP-X9110 Network Manual

3. Web Control
3.1 Projector Web Control (continued)

3.1.3 Network Settings

Item
Common Setup
Projector Name
sysLocation (SNMP)
sysContact (SNMP)
AMX D.D.
(AMX Device
Discovery)
(continued on next page)
40
Displays and configures network settings.
Configures the settings common to wireless and wired LAN.
Configures the name of the projector.
The length of the Projector Name can be up to 64
alphanumeric characters. Only alphabets, numbers and
following symbols can be used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Particular projector name is pre-assigned by default.
Configures the location to be referred to when using SNMP.
The length of the sysLocation can be up to 255 alphanumeric
Only numbers '0-9', alphabet 'a-z' and 'A-Z' can
characters.
be used.
Configures the contact information to be referred to when
using SNMP.
The length of the sysContact can be up to 255 alphanumeric
Only numbers '0-9', alphabet 'a-z' and 'A-Z' can
characters.
be used.
Configures the AMX Device Discovery setting to detect the
projector from the controllers of AMX connected to the same
network. For the details of AMX Device Discovery, visit the
AMX web site.
URL: http://www.amx.com
Description