Remote Control - Hitachi CP-AW250NM Operating Manual

3.11 Remote Control

The functions on the bundled remote control are assigned to the Web Remote
Control screen.
Item
POWER
COMPUTER
VIDEO
BLANK
FREEZE
MUTE
MENU
▲
▼
◄
►
ENTER
RESET
PAGE UP
PAGE DOWN
SLIDESHOW
• The Web Remote Control does not support repeat function that
NOTE
performs an action while holding a button clicked down.
• Since the repeat function is not available, click the button repeatedly as many
times as you require.
• Even if you hold the button clicked down for a while, the Web Remote Control
sends your request command one time only. Release the button, then click it again.
• When the [POWER] button is pushed, a message window comes up to conrm
the operation. To control the power, push [OK], otherwise push [Cancel].
• The [PAGE DOWN] and [PAGE UP] buttons on the Web Remote Control
cannot be used as mouse emulation function of the projector.
You can use your Web browser to control the
projector.
• Do not attempt to control the projector with
the projector's remote control and via your Web
browser at the same time. It may cause some
operational errors in the projector.
Assigned the same operation as STANDBY/ON button.
Assigned the same operation as COMPUTER button.
Assigned the same operation as VIDEO button.
Assigned the same operation as BLANK button.
Assigned the same operation as FREEZE button.
Assigned the same operation as MUTE button.
Assigned the same operation as MENU button.
Assigned the same operation as ▲ button.
Assigned the same operation as ▼ button.
Assigned the same operation as ◄ button.
Assigned the same operation as ► button.
Assigned the same operation as ENTER button.
Assigned the same operation as RESET button.
Assigned the same operation as PAGE UP button.
Assigned the same operation as PAGE DOWN button.
Starts the Slideshow.
Description
3. Web Control
67