My Image Function - Hitachi CP-AW250NM Operating Manual

4. My Image Function

4. My Image Function
The projector can display still images that are transferred via the network.
MY IMAGE transmission requires an exclusive application for your computer.
"PJImg/Projector Image Tool" is necessary to use MY IMAGE transmission.
It can be downloaded from the Hitachi web site (http://www.hitachi-america.us/
digitalmedia or http://www.hitachidigitalmedia.com).
Refer to the manual for the application for instructions.
To display the transferred image, select the MY IMAGE item in the NETWORK
menu. For more information, please see the description of the MY IMAGE item of
the NETWORK menu. (
• It is possible to allocate the image le up to 4 in the maximum.
NOTE
• Using MY BUTTON that registered MY IMAGE can display transferred image.
( OPTION menu in the User's Manual – Operating Guide)
• The image le also can be displayed by using schedule function from the web
browser. Refer to item 7.3 Event Scheduling (
• If you display MY IMAGE data on screen while you are using the USB Display
function, the application for the USB Display will be closed. To restart the
application, exit the MY IMAGE function, and then the software in the projector,
LiveViewerLiteUSB.exe, will run again. (
– Operating Guide)
70
Transfer image data
NETWORK menu in User's Manual – Operating Guide)
Display image data (
81) in detail.
USB Display in the User's Manual
-
)
1 4