Slideshow Mode, Playlist - Hitachi CP-AW250NM Operating Manual

PC-LESS Presentation (continued)
Slideshow mode
The Slideshow mode displays images in full screen and switches the images at
intervals set in INTERVAL on the Thumbnail screen menu (
You can start this function from the Slideshow menu. To display the Slideshow
menu, select the SLIDESHOW button in the Thumbnail mode and press the
ENTER button on the remote control or INPUT button on the projector.
The following operations can be accessible while the Slideshow is displayed.
Button operation
The keypad
The remote
on the
control
projector
ENTER INPUT
* These operations are not accessible while the projector OSD is displayed.
• It is not possible to change the input port by using the INPUT button
NOTE
when the Thumbnail screen, Slideshow, or Full Screen is displayed.
• When the Slideshow mode is set to ONE TIME, the last slide of the
presentation will be held on screen till the ENTER button on the remote control
or Web Remote Control, or INPUT button on the projector is pushed.
Web Remote
in web browser
software.
ENTER
Presentation tools
78).
Functions
Displays thumbnail
83