Manual ConGuration; History Connection - Hitachi CP-AW250NM Operating Manual

1. Connection to the network
1.6 Manual conguration (continued)

1.6.2 History connection

The "LiveViewer" can memory the network
settings when connecting to the projector as
a history record. After that, selecting a history
record can quickly connect the network with the
projector.
1) Select the [History].
2) Choose a history record listed in the window.
3) Click the [Connect].
4) The network connection will be established.
Proceed to item 1.8 Conrming the connection to your destination. (
If you want to copy a history record to a prole data, select one of the history
record and click the [Register to prole]. The prole data cannot be erased
automatically.
• The number of the history record is maximum 10 for each network
NOTE
adapter. When the 11th data is stored, the oldest record among the 10 will be
overwritten.
• The date & time information in each history record is renewed when the
network is connected by using the history record.
• If the DHCP is set on in the projector, the network connection between the
projector and computer may not be established since IP address may be
varied.
• Even if you use the prole connection, it will be memorized as a history
record.
24
30)