3.1 Projector Web Control (continued)
3.1.3 Network Settings
3.1.3.1 Common Setup
Con gures the settings common to wireless and wired AN.
When changing the settings, click the [Network Restart] button after clicking the
[Apply] button to re ect the settings of the projector.
NOTE
If you connect the projector to an existing network, consult a network
administrator before setting ser er addresses.
The projector does not allow both wireless and wired AN to be connected to
the same network. Do not set the same network address for both wireless and
wired AN.
continued on next page)
3. Web Control
41