Hitachi CP-AW250NM Operating Manual page 88

PC-LESS Presentation (continued)
Operating by buttons or keys
You can control the images in the Thumbnail screen with the remote control or
keypad or a web browser software. The following functions can be supported
while the Thumbnail is displayed.
The remote
control
▲/▼/◄/►
PAGE UP
PAGE DOWN
ENTER
The SETUP menu for the selected image
Item
SETUP
RETURN
START
STOP
SKIP
ROTATE
Button operation
The keypad on Web Remote in web
the projector browser software.
▲/▼/◄/► UP/DOWN/LEFT/RIGHT Move cursor
PAGE UP
-
PAGE DOWN
INPUT ENTER
Use the ◄/► cursor buttons to switch each setting or use the
► cursor button to execute the functions as follows.
Press the ► cursor button or ENTER to return to the Thumbnail
screen.
Switch to ON to set the selected image as the rst image in the
Slideshow. This setting information will be saved in the "playlist.
txt" le ( 85).
Switch to ON to set the selected image as the last image in the
Slideshow. This setting information will be saved in the "playlist.
85).
txt" le (
Switch to ON to skip the selected image in the Slideshow. This
setting information will be saved in the "playlist.txt" le (
Press the ► cursor button or ENTER to rotate the selected
image 90 degrees clockwise. This setting information will be
saved in the "playlist.txt" le (
Presentation tools
Switches pages
• Displays the selected
image on the Full Screen
mode when a cursor is
on a thumbnail image.
• Displays the SETUP
menu (
selected image when a
cursor is on a thumbnail
image number.
Functions
85).
Functions
next) for the
85).
79