Specifications - Cisco SCE 1000 Installation And Configuration Manual

Specifications

Step 6 Connect the control cable (supplied in the kit) from the Bypass 9-pin D-Type connector on the
rear panel of the SCE 1000 platform to the Control connector on the External Optical Bypass
module.
The SCE 1000 platform immediately starts providing power to the External Optical Bypass
module, so the bypass module becomes inactive, and starts transferring the traffic to the SCE
1000 platform. The "No Bypass" LED should therefore be lit.
Specifications
Item
Optical Connectors
Switching Speed
Operating Wavelength
Operating Temperature
Storage Temperature
Weight
Table A-1
Function
Bypass Present (common to 2)
Bypass Present (common to 1)
GND
GND
+5V
+5V
--
--
--
Shield
Cisco SCE 1000 2xGBE Installation and Configuration Guide
A-6
Value
SC
15 ms max
• Multi Mode: 850 nm
• Single Mode: 1310 nm
-10° C to +65° C (14° F to 149° F)
-30° C to +70° C (-22° F to 158° F)
12 oz (340 g)
Control cable pinouts
Pin (D-type side)
1
2
3
4
5
6
7-NC
8-NC
9-NC
Shield
Appendix A The External Optical Bypass Module
Pin (RJ-45 side)
1
2
3
4
5
6
7
8
--
Shield
OL-7821-04