Cisco SCE 1000 Installation And Configuration Manual page 66

Initial System Configuration
Parameter
time zone name and
offset
local time and date
SNTP Configuration
broadcast client status
unicast query interval
unicast server IP address
DNS Configuration
DNS lookup status
default domain name
IP address
RDR Formatter Destination Configuration
IP address
TCP port number
Access Control Lists
Access Control List
number
list entries (maximum 20
per list)
IP access ACL
telnet ACL
SNMP Configuration
SNMP agent status
GET community names
SET community names
trap managers
Cisco SCE 1000 2xGBE Installation and Configuration Guide
5-4
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Definition
Standard time zone abbreviation and minutes offset from UTC.
Current local time and date. Use the format:
00:00:00 1 January 2002
Set the status of the SNTP broadcast client.
If enabled, the SCE will synchronize its local time with updates received
from SNTP broadcast servers.
Interval in seconds between unicast requests for update (64 – 1024)
IP address of the SNTP unicast server.
Enable or disable IP DNS-based hostname translation.
Default domain name to be used for completing unqualified host names
IP address of domain name server. ( maximum of 3 servers)
IP address of the RDR-formatter destination
TCP port number of the RDR-formatter destination
How many ACLs will be necessary? What IP addresses will be
permitted/denied access for each management interface? You may want
ACLs for the following :
• Any IP access
• Telnet access
• SNMP GET access
• SNMP SET access
IP address, and whether permitted or denied access.
ID number of the ACL controlling IP access.
ID number of the ACL controlling telnet access.
Enable or disable SNMP management.
Community strings to allow GET access and associated ACLs (maximum
20).
Community strings to allow SET access and associated ACLs (maximum
20).
Trap manager IP address, community string, and SNMP version.
(maximum 20)
OL-7821-04