Cisco SCE 1000 Installation And Configuration Manual page 103

Chapter 7 Basic SCE 1000 Platform Operations
#Created on 15:50:56
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community "public" ro
snmp-server host 10.1.1.253 traps version 1 "public"
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
SCE 1000#
SCE 1000#copy running-config startup-config
Writing general configuration file to temporary location...
Backing-up general configuration file...
Copy temporary file to final location...
SCE 1000#
For backup purposes, the old startup-config file is saved under the directory:
tffs0:system/prevconf. Refer to
an explanation on how to recover previous configuration.
To remove a configuration command from the running-config, use the no form of the command.
E
XAMPLE
The following example illustrates how to remove all DNS settings from the running
configuration.
SCE 1000(config)#no ip name-server
SCE 1000(config)#
OL-7821-04
CET
:
Cisco SCE 1000 2xGBE Installation and Configuration Guide
MON February 11 2002
Recovering a Previous Configuration
Managing SCE 1000 Configurations
(on page 7-8) for
7-7