Connecting The Speaker Cables - Hitachi 32LD7200 User Manual

INSTALLATION INSTRUCTIONS (continued)

Connecting the Speaker Cables

Connecting the Speaker Cables
CAUTION
Make sure that the main power switch of the monitor is turned off (standby or indicating lamp: off/red) when removing or connecting
the speaker cables.
1. Attach the speaker connecting cables to the monitor. (Make sure the ferrite core is toward the monitor side)
Treating the wire ends
Pull off whilst twisting
Please prepare the supplied
speaker cables
Twist the
heads
2. Attach the speaker cables to speaker systems.
Speaker
terminal
Connect the red/black - coloured
wire to the Θ Black side.
Connect the red - coloured wire to
the + Red side.
16
Red Black
Connect the
Connect the
red/black
red coloured
coloured wire
wire
Ferrite core
Press down
How to connect
the lever
the speaker
cables
How to connect
the speaker
cables
Insert the
wire
Hold down Insert the
the lever wire
Red Black
Connect the Connect the
red coloured red/black
wire coloured wire
Ferrite core
Release
the lever
Release
the lever