Connecting To A Pc - Hitachi 32LD7200 User Manual

INSTALLATION INSTRUCTIONS (continued)

Connecting to a PC

Connecting to a PC
(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
See "PRODUCT SPECIFICATIONS" concerning the specifications of this device.
•
(2) Make sure that the power switch of the personal computer is turned off.
(3) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output terminal
of the personal computer.
Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
•
Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with
•
the personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask
the personal computer manufacturer or your local retail dealer.
Speaker (R)
SPEAKER TERMINAL
(6Ω 12W)
Power cord
Connecting to a PC Device
To signal
output
terminal
(DVI)
Setting
•
RGB1: DVI-PC
RGB2: RGB
51
For details, refer to
Monitor (rear panel)
Power cable
connector
DIGITAL INPUT
RGB 1
PC
(DVI)
To signal To audio
output output
terminal terminal
(D-sub)
PC
52
50 52
~
ANALOG INPUT AUDIO IN
RGB 2
RGB 1 RGB 2
PC
(D-SUB)
Connecting to an Audio Visual Device
To signal
output
terminal
(DVI)
Setting
•
RGB1: DVI-STB
RGB2: Component
For details, refer to
Speaker (L)
SPEAKER TERMINAL
(6Ω 12W)
3.5 mm
Stereo
mini jack
To audio
output
terminal
(Example)
DVD Player
50 51
15