Hitachi 32LD7200 User Manual page 27

OPERATING INSTRUCTIONS (continued)
Displaying MULTI PICTURE (continued)
Activating the Split mode from the video input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
The speaker icon can be shifted left and right by pressing the
•
video will be output from the side on which the speaker icon is located.
The same video input mode cannot be selected for both screens at the same time.
•
Pressing the MULTI PICTURE button again will cancel the 2 pictures display.
•
Refer to the table for 2 pictures (Split) mode.
•
Activating the MULTI PICTURE mode from the RGB input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
This mode can be available from RGB1 (DVI-PC) and RGB2 (RGB) input.
•
The speaker icon can be shifted up and down by pressing the
•
output from the side on which the speaker icon is located.
The sub-screen position can be selected up and down by pressing
•
The sub-screen can be selected with the AV1~AV6, TV channel buttons from the status that the speaker icon
•
appears on the left side of AV* etc. as shown in the diagram to the right.
Pressing the MULTI PICTURE button again will cancel the 2 pictures display.
•
NOTE
Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the multi picture display, the mode will not
•
change to power save mode.
2 Pictures (Split) [TV / Video Input]
Input terminal
Sub
PAL
TV
Main
SECAM
TV
PAL, SECAM
AV1
~ AV5
NTSC3.58/4.43
AV2
RGB
AV3
576i, 576p
480i, 480p
1080i/50
AV4
AV6
1080i/60
720p/50
720p/60
RGB1 STB
RGB2 Component
4 Pictures [TV / Video Input]
Input terminal
Sub
PAL
TV
Main
SECAM
TV
PAL, SECAM
AV1
~ AV5
NTSC3.58/4.43
AV2
RGB
AV3
576i, 576p
480i, 480p
AV4 1080i/50
AV6
1080i/60
720p/50
720p/60
RGB1 STB
RGB2 Component
NOTE
About 720p/50 Hz
720p/50Hz can support for AV4, AV6 and RGB1 (DVI-STB) only during the single picture mode.
•
RGB2 (composite) is not available for 720p/50 Hz.
•
26
AV1 ~ AV5 AV2,AV3
NTSC3.58 576i
RGB
NTSC4.43 576p 480p
AV1 ~ AV5 AV2,AV3
NTSC3.58 576i
RGB
NTSC4.43 576p 480p
and SELECT buttons. The audio of the
and SELECT buttons. The audio will be
and SELECT buttons.
AV1: Displays the VIDEO input signal of the sub-screen.
AV4, AV6
480i 1080i/ 1080i/ 720p/ 720p/
50 60 50 60
AV4, AV6
480i 1080i/ 1080i/ 720p/ 720p/
50 60 50 60
RGB1 RGB2
TELE
TEXT
STB Component
( : Available)
Teletext is available only for TV
RGB1 RGB2
TELE
TEXT
STB Component
( : Available)
AV1 AV2
RGB2
AV1
(Sub-
screen)
Sub
Main
▼
Main
Sub 1
Sub 2
Sub 3