General Connection And Applications; Connecting The Monitor To The Computer - Hitachi CML151XW Service Manual

5. General Connection and Applications

Procedures for installing and using this CML151X LCD monitor are described below.

5.1 Connecting the monitor to the computer

1) Place the display on a flat, sturdy surface. Choose an area free from excessive heat, moisture,
and sunlight. Avoid possible sources of electromagnetic interference, such as transformers,
motors, and fluorescent lighting.
2) Locate the AC power adapter with attached power cable and then connect the power cable to
the power jack on the back of the display. Plug the AC power cord into a power outlet, and
plug the other end into the AC power adapter. The power cord is a shielded type and is
provided as a safety precautions to ensure proper electrical grounding.
3) Plug the D-SUB 15-pin analog video signal cable into the Analog Video Input port on the
back of the display. Connect the other end of the video cable into your computer's video port.
The assignment of the pins of the connector is shown below.
Hitachi CML151X LCD Monitor Service Manual
12