Notes - Hitachi 32LD7200 User Manual

NOTES

About screen defects
NOTES
High precision technology is used in the making of LCD panels, but there may be dark spots (points that do not illuminate) and bright spots
•
(points that are too bright) in some cases. These do not indicate a malfunction.
About residual images
In some cases, residual images may remain after the short-term display of still images is displayed. These will disappear in a few minutes,
•
and the display will return to normal. However, if used in high temperatures, it sometimes spends some tens of minutes to return to normal.
Please note that this is not a malfunction.
About the panel screen
LCD screen display images by illuminating fluorescent lamps inside of the panel. Because of this, the temperature of the panel surface may
•
rise in some cases. Also, LCD panels are made of finely processed glass, so please avoid pushing by fingers or hands and giving strong
impact on the panel. It may cause damage to the LC cells, and/or there is danger of glass breakage.
About the power swivel
Do not put hands or faces close to the monitor whilst operating the swivel function.
•
It could cause a physical injury. Use special caution in households where children are present. (Refer to Power Swivel shown on
•
Using in low temperatures
The response speed of LCD panel becomes slow as the ambient temperature goes down. This feature may cause residual images in some
•
cases, but this is not a malfunction. It will return to normal in a while after the temperature becomes normal.
)
23
7