Download Print this page

Hitachi 32LD7200 User Manual

Hide thumbs

Advertisement

Quick Links

USER'S MANUAL
32LD7200
Thank you very much for purchasing the HITACHI LCD
Monitor. Before using your monitor, please carefully read the
"SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so
you will know how to operate the monitor properly. Keep this
manual in a safe place. You will find it useful in the future.
Notes on lnstallation Work:
This product is marketed assuming that it is installed by qualified
personnel with enough skill and competence. Always have an
installation specialist or your dealer install and set up the product.
HITACHI cannot assume liabilities for damage caused by mistake
in installation or mounting, misuse, modification or a natural
disaster.
Note for Dealers:
After installation, be sure to deliver this manual to the customer
and explain to the customer how to handle the product.

Advertisement

loading

  Also See for Hitachi 32LD7200

  Related Manuals for Hitachi 32LD7200

  Summary of Contents for Hitachi 32LD7200

  • Page 1 USER’S MANUAL 32LD7200 Thank you very much for purchasing the HITACHI LCD Monitor. Before using your monitor, please carefully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the monitor properly. Keep this manual in a safe place. You will find it useful in the future.
  • Page 2: Features

    Important FEATURES Please read this User's Manual thoroughly, especially the Safety Instructions on Page 3 to 6. Mis-use may cause damage to your Large-screen, high-definition LCD panel FEATURES LCD monitor, which could shorten its lifespan, or cause injury to The 32-inch colour LCD panel with a resolution of 1366(H) X yourself.
  • Page 3: Table Of Contents

    CONTENTS FEATURES ............1 OTHER FEATURES ..........41 SAFETY INSTRUCTIONS ........3 Automatic Store ..............41 NOTES..............7 Audio Switching..............42 COMPONENT NAMES..........8 Power Save Mode ..............43 DVD Player/ STB Selection........... 43 Main Unit ................. 8 Signal Check (RGB mode) ............ 44 Remote control ................ 9 TROUBLESHOOTING ..........45 Loading Batteries ..............
  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS This LCD monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage, and follow all the instructions.
  • Page 5 SAFETY INSTRUCTIONS (continued) About the Symbols (continued) WARNING Be cautious of the power cord connection. Incorrect connection of the power cord could result in fire or electrical shock. Do not touch the power cord with a wet hand. • Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power •...
  • Page 6 SAFETY INSTRUCTIONS (continued) About the Symbols (continued) CAUTION Be careful in moving the monitor. Neglect could result in an injury or damage. Do not move the monitor during use. Before moving, disconnect the power plug and all external connections. • You are advised to move the monitor with two persons.
  • Page 7 SAFETY INSTRUCTIONS (continued) About the Symbols (continued) Prevention of an obstacle to Radio receivers This monitor has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers. Keep the monitor away from Radio. •...
  • Page 8: Notes

    NOTES About screen defects NOTES High precision technology is used in the making of LCD panels, but there may be dark spots (points that do not illuminate) and bright spots • (points that are too bright) in some cases. These do not indicate a malfunction. About residual images In some cases, residual images may remain after the short-term display of still images is displayed.
  • Page 9: Component Names

    COMPONENT NAMES COMPONENT NAMES Main Unit Main Unit Front Panel Cabinet (front frame) Control panel Adjustment buttons are located • on the top. Remote-control receiver 9 Indicating lamp 19 The main power switch is located on the top. • SUB-POWER button 19 Main power switch Front VOLUME UP/DOWN buttons...
  • Page 10: Remote Control

    COMPONENT NAMES (continued) Remote control Remote control POWER button RECALL button FUNCTION SELECT button INPUT SELECT buttons DVD CONTROL buttons MENU button FREEZE/RETURN button OK button SELECT/ADJUST button PICTURE MODE button SOUND MODE button CH I/CH II button (TV) VOLUME UP/DOWN button CHANNEL UP/DOWN button (TV) MUTE button PROGRAM SELECT buttons...
  • Page 11 COMPONENT NAMES (continued) Remote control (continued) FUNCTION SELECT Press this button to indicate function mode with a lamp. RECALL (TV / VIDEO / RGB) DVD and SAT Press this button to display input signal. INPUT SELECT Press these buttons to change input mode.
  • Page 12 COMPONENT NAMES (continued) Remote control (continued) [Buttons for TELETEXT Mode] PAGE UP / DOWN button COLOUR buttons (RED, GREEN, YELLOW, BLUE) TEXT / TV+TEXT button INDEX button REVEAL button CANCEL button TV / TEXT button SUB TITLE button TELETEXT FUNCTION Function Buttons on Remote Control TV / TEXT...
  • Page 13: Installation Instructions

    INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Installation Installation WARNING Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.
  • Page 14: Connection To An Audio Visual Device

    INSTALLATION INSTRUCTIONS (continued) Connection to an Audio Visual Device Connection to an Audio Visual Device (1) Make sure that the power switch of the monitor is turned off. (2) Make sure that the power switch of the audio visual device is turned off. (3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the signal output terminal of the audio visual device.
  • Page 15 INSTALLATION INSTRUCTIONS (continued) Connection to an Audio Visual Device (continued) Precautions when connecting the antenna Please use a coaxial cable which is free from interference to connect the antenna. Avoid using a parallel flat feeder wire as interference • may occur, causing reception to be unstable and stripe noise to appear on the screen. Avoid using indoor antenna as this may be affected by interference.
  • Page 16: Connecting To A Pc

    INSTALLATION INSTRUCTIONS (continued) Connecting to a PC Connecting to a PC (1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this device. See "PRODUCT SPECIFICATIONS" concerning the specifications of this device. •...
  • Page 17: Connecting The Speaker Cables

    INSTALLATION INSTRUCTIONS (continued) Connecting the Speaker Cables Connecting the Speaker Cables CAUTION Make sure that the main power switch of the monitor is turned off (standby or indicating lamp: off/red) when removing or connecting the speaker cables. 1. Attach the speaker connecting cables to the monitor. (Make sure the ferrite core is toward the monitor side) Treating the wire ends Black Black...
  • Page 18: Mounting The Side Input

    INSTALLATION INSTRUCTIONS (continued) Mounting the Side Input Mounting the Side Input 1. Mount the side input into the speaker holder. Hook the clamps (4 pieces) of the speaker holder into the holes as shown in the figure and pull them down until it sounds click. Fasten the side input with the speaker holder by the accessory screw .
  • Page 19: Power Cord Connection

    INSTALLATION INSTRUCTIONS (continued) Power Cord Connection Power Cord Connection Connect the power cord, after completing all other connections. UK only Europe (1) Connect the power cord to this device. (2) Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.) CAUTION Use only the power cord provided.
  • Page 20: Operating Instructions

    OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Turning Power On and Off Turning Power On and Off To turn the monitor power ON, press the main power • switch on the monitor main unit to ON, and then press the SUB POWER button of control panel or the POWER button on the remote control.
  • Page 21: Input Switching

    OPERATING INSTRUCTIONS (continued) INPUT SELECT button CHANNEL UP/DOWN buttons RECALL button INPUT SELECT buttons CHANNEL Input Switching UP/DOWN button Input Switching Input can be switched by pressing the AV1~6, RGB1 or PROGRAM • RGB2 buttons of the remote control. SELECT buttons Input can be switched to TV by pressing CHANNEL •...
  • Page 22 OPERATING INSTRUCTIONS (continued) Size Switching (continued) When you want to Set the display size to Input signal Display screen Remarks Play a 14:9 image in a 16:9 screen expanded This mode is provided for the broadcasting C14 : 9L vertically and squeezed horizontally. program with WSS code-C14:9L.
  • Page 23: Volume Adjustment

    OPERATING INSTRUCTIONS (continued) Volume Adjustment Audio Mute Volume Adjustment Audio Mute The volume can be adjusted by pressing the The audio volume can be temporarily muted by pressing the buttons of the remote control (or the volume MUTE button of the remote control. buttons of the monitor unit).
  • Page 24: Power Swivel

    OPERATING INSTRUCTIONS (continued) Power Swivel Power Swivel This feature controls the motorised stand. It allows turning the LCD monitor left or right using the remote control. • WARNING Make sure that the main power switch of the monitor is turned off when removing or connecting the power cord, the connector cables, and the speaker cables.
  • Page 25: Input Signal Screen Display

    OPERATING INSTRUCTIONS (continued) Input Signal Screen Display Input Signal Screen Display The input signal status can be displayed on the screen by pressing the RECALL button of the remote control. The display will go out in approximately 6 seconds. • RECALL button TV position ABCDE...
  • Page 26: Displaying Multi Picture

    OPERATING INSTRUCTIONS (continued) RECALL button INPUT SELECT buttons SELECT/ADJUST button CHANNEL UP/DOWN button Displaying MULTI PICTURE MULTI MODE MULTI PICTURE button button Displaying MULTI PICTURE When the MULTI PICTURE button on the remote control is pressed, the screen will display the multi pictures. And then three types of the screen can be selected by pressing the MULTI MODE button on the remote control.
  • Page 27 OPERATING INSTRUCTIONS (continued) Displaying MULTI PICTURE (continued) Activating the Split mode from the video input screen Pressing the MULTI PICTURE button one time will display 2 pictures. The speaker icon can be shifted left and right by pressing the SELECT buttons. The audio of the •...
  • Page 28: Picture Freezing

    OPERATING INSTRUCTIONS (continued) FREEZE button Picture Freezing Picture Freezing When the FREEZE button on the remote control is pressed, the screen transfers into the [Split] freeze mode. There are two types of freezing screen mode, Split and Strobe. These are possible to select at the •...
  • Page 29: Using The Menu Screen (On-Screen Display System)

    OPERATING INSTRUCTIONS (continued) Using the Menu Screen RECALL button (On-screen display system) Using the Menu Screen When the MENU button of the remote control or the control panel is pressed, the adjustment menu screen will be displayed; RETURN button MENU button from there, several adjustments and settings are possible by using the SELECT button, ADJUST button and OK button.
  • Page 30: Setup Menu (Tv Mode)

    OPERATING INSTRUCTIONS (continued) SETUP MENU (TV mode) SETUP MENU (TV mode)
  • Page 31 OPERATING INSTRUCTIONS (continued) SETUP MENU (TV mode) (continued) Selected characters Setup hint Auto Tuning Select the country name by SELECT buttons and press OK button. • If some required stations could not be preset in this auto tuning function, Country select and preset the required station in the required position by the manual tuning operation.
  • Page 32: Setup Menu (Video Mode)

    OPERATING INSTRUCTIONS (continued) SETUP MENU (Video mode) SETUP MENU (Video mode) Selected characters Setup hint Do not change the original setting. System1 System2 System (System1: Europe/Asia, System2: North America) Colour System System1 This should correspond to the colour system of the signal from the equipment that is connected to AV1~AV5 video input terminal.
  • Page 33: Setup Menu (Rgb Mode: Rgb1 (Dvi-Pc), Rgb2 (Rgb))

    OPERATING INSTRUCTIONS (continued) SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB)) SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB)) Selected characters Setup hint Adjust Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are − Auto Adjust* Pressing the OK button here, adjusted automatically.
  • Page 34 OPERATING INSTRUCTIONS (continued) SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB)) (continued) Selected characters Setup hint Vertical Filter Turn On when concerned about screen flicker. Frequency Mode Greyed out This function is not available. This should correspond to the signal mode of the signal from the equipment DVI-PC DVI-STB RGB1...
  • Page 35: Function Menu

    OPERATING INSTRUCTIONS (continued) FUNCTION MENU FUNCTION MENU Selected characters Setup hint This moves the picture around the screen in small amounts, at set intervals, 5Min. 10Min. to reduce the residual image. This is where stationary objects, such as Screen Saver screen logos, leave a slight image visible after they should have 60Min.
  • Page 36: Picture Menu (Tv/Video Mode)

    OPERATING INSTRUCTIONS (continued) PICTURE MENU (TV/Video mode) PICTURE MENU (TV/Video mode)
  • Page 37 OPERATING INSTRUCTIONS (continued) PICTURE MENU (TV/Video mode) (continued) Selected characters Setup hint Dynamic: This setting is best for very bright ambient lighting. Dynamic Natural Cinema Picture Mode Natural: This setting is for normal lighting conditions. Cinema: This setting is best for watching movie. Adjust for maximum visibility to suit the ambient brightness.
  • Page 38 OPERATING INSTRUCTIONS (continued) PICTURE MENU (TV/Video mode) (continued) Selected characters Setup hint Turn On when the original balance of each colour is required to adjust Colour Management depending on the user's preference. Magenta Magenta is weakened. Magenta is strengthened. Red is weakened. Red is strengthened.
  • Page 39: Picture Menu (Rgb Mode)

    OPERATING INSTRUCTIONS (continued) PICTURE MENU (RGB mode) PICTURE MENU (RGB mode) Selected characters Setup hint Adjust for maximum visibility to suit the ambient brightness. This can adjust further till [+40] by pressing and holding SELECT button at Narrows the gap between Broadens the gap between [+31].
  • Page 40: Audio Menu

    OPERATING INSTRUCTIONS (continued) AUDIO MENU AUDIO MENU Selected characters Setup hint Movie: This selects the audio suitable for Movie. Music: This selects the audio suitable for Music. Movie Music Speech Favourite Audio Mode Speech: This selects the audio suitable for News, Talk show etc. Favourite: This mode should be adjusted depending on user's preference.
  • Page 41: Timer Menu

    OPERATING INSTRUCTIONS (continued) TIMER MENU TIMER MENU Selected characters Setup hint This function automatically sets the power to standby status when the Off Timer indicated time period has elapsed. This automatically sets the power from standby to ON when the indicated - - ( : - - ) ( - - : ) - - On Timer...
  • Page 42: Other Features

    OTHER FEATURES OTHER FEATURES Automatic Store Automatic Store Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. Menu Display Registration condition Menu Display Registration condition Picture Function Picture Mode Screen Saver 1 setting is registered.
  • Page 43: Audio Switching

    OTHER FEATURES (continued) Audio Switching Audio Switching A2 / NICAM / Sound Multiplex (TV mode) The CH I / II button is only useful for NICAM and sound multiplex signals. • Otherwise pressing this button will have no effect. BILINGUAL / DUAL sound broadcast When bilingual program is received, sound mode display appears in yellow as shown on right.
  • Page 44: Power Save Mode

    You can use this remote control to operate the selected maker of DVD Player and STB by pressing the following buttons on the remote • control simultaneously. <"DVD" Selection> Makers of DVD Player Set Maker Set Type Makers of DVD Player Set Maker Set Type HITACHI FUNAI Mitsubishi Pioneer ONKYO Panasonic ZENITH GREEN TOSHIBA THOMSON...
  • Page 45: Signal Check (Rgb Mode)

    OTHER FEATURES (continued) DVD Player/STB Selection (continued) Set up hint Example) HITACHI DVD To operate HITACHI DVD player, press and hold the button, followed by the button. 1. Set up the maker Press button to indicate the DVD LED on the remote control.
  • Page 46: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING Symptoms That Seemingly Appear to be Failures Symptoms That Seemingly Appear to be Failures Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. WARNING Customer servicing can be hazardous. Symptom Point to check See page...
  • Page 47 TROUBLESHOOTING (continued) Symptoms That Seemingly Appear to be Failures (continued) Symptom Point to check See page There are locations on the screen that are different from the High-precision technology is used to manufacture the LCD • • periphery (*). panel. However in some cases, there are minor defects in some parts of the screen.
  • Page 48: Actions To Correct Abnormal Displays

    TROUBLESHOOTING (continued) Actions to Correct Abnormal Displays Actions to Correct Abnormal Displays Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (only for RGB2) Symptom 1 Text displayed across the screen appears vertically streaked, with some characters blurred (Figure 1). Figure 1 Vertical Streaks Before adjustment.
  • Page 49: Product Specifications

    PRODUCT SPECIFICATIONS Product specifications and designs are subject to change without notice. PRODUCT SPECIFICATIONS Display Approx.32 inches (698 (H) x 392 (V) mm, diagonal 800 mm) Panel dimensions Resolution 1366 (H) x 768 (V) pixels Net dimensions 1015(W) x 618 (H) x 340 (D) mm Net weight 25.0 kg Temperature...
  • Page 50: Signal Input

    PRODUCT SPECIFICATIONS (continued) Signal Input Signal Input RGB terminal (D-sub 15-pin connector) Input signal G or sync on green (Y) B (P No connection No connection When different kinds of input signals are simultaneously input • R.GND (P . GND) to the monitor via a graphics board or the like, the monitor will automatically select the signals in the following priority order: G.GND (Y.
  • Page 51: Recommended Signal List

    PRODUCT SPECIFICATIONS (continued) Signal Input (continued) Scart connector pin specifications Signal Signal AUDIO OUT (RIGHT) Not Used AUDIO IN (RIGHT) RGB-R GND AUDIO OUT (LEFT/MONO) AUDIO GND RGB-R / S.VHS CHROMINANCE IN RGB-B GND BLANKING SIGNAL AUDIO IN (LEFT/MONO) COMPOSITE VIDEO GND RGB-B IN BLANKING SIGNAL GND AUDIO/RGB SWITCH / 16:9...
  • Page 52 PRODUCT SPECIFICATIONS (continued) Recommended Signal List (continued) With HDMI input (AV6 input) Signal mode Horizontal Dot clock Remarks frequency (kHz) frequency (MHz) Signal Name Resolution Vertical frequency (Hz) 640 x 480 59.94 31.47 25.18 EIA-861B 576i 720(1440) x 576 50.00 15.63 27.00 EIA-861B...
  • Page 53 PRODUCT SPECIFICATIONS (continued) Recommended Signal List (continued) With Analogue signal input (RGB2 input) Signal mode Horizontal Dot clock Remarks Vertical frequency frequency (kHz) frequency (MHz) Signal Name Resolution (Hz) 640 X 400 70.08 31.47 25.18 640 X 480 59.94 31.47 25.18 W-VGA 864 X 480...
  • Page 54 This guarantee does not cover the replacement of exhausted batteries, the adjustment of user controls, or aerial alignment. Any parts replaced under this guarantee shall become the property of HITACHI EUROPE LTD. Please note that evidence of the date of purchase will be required before any service under this guarantee is carried out.
  • Page 55 é é Ž Ž EUROPE/EUROPA TV SETUP *This lead should be available from special lead supplier. Installation *Ce cable est en vente dans les magasins de câbles spécialisés. TV-Installation *Dieses Kabel ist im Fachhandel erhältlich. COMPONENT VIDEO OUT HDMI Monitor rear panel Panneau arrière du moniteur AERIEL DVD PLAYER...
  • Page 56 IMPORTANT : Si vous avez l'intention de placer votre téléviseur dans WICHTIGER HINWEIS : Achten Sie bei der Aufstellung des Geräts in einem IMPORTANT : If you intend placing this TV into a cabinet or wall Regal oder Schrank darauf, dass zu beiden Seiten des Geräts sowie hinten un meuble ou dans un renfoncement, prévoyez un espace libre de above, please ensure there is at least a 100mm (10cm)
  • Page 57 handset controls used for television autotune commandes de la télécommande permettant d’effectuer un réglage auto Fernbedienungselemente,die fŸr den automatischen TV-Suchlauf benutzt werden Menü menu Menu Utiliser ce bouton pour Drücken Sie diese Use this button to Taste zum Aufrufen des afficher le menu principal.
  • Page 58 Éstart Autotune procedure. Language English Fran•ais Deutsch The first screen viewed will ask you to choose the Espa–ol language of your TVÕs display.Use the UP/DOWN Italiano Norsk cursor button to choose your language. Svenska TŸrkce Nederlands Select Return Exit Once highlighted, accept selection. Setup Auto Tuning Country...
  • Page 59 Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: csgswe@hitachi-eu.com Fax: +39 02 48786381/2 Email: customerservice.italy@hitachi-eu.com HITACHI EUROPE S.A.S HITACHI EUROPE LTD (Norway) AB Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker FRANCE...