Hitachi 32LD7200 User Manual page 37

OPERATING INSTRUCTIONS (continued)
PICTURE MENU (TV/Video mode) (continued)
Selected characters
Picture Mode
Narrows the gap between
Contrast
brightness and darkness.
Black is subdued for increased
Brightness
overall darkness.
Colour
Decrease colour intensity.
Sharpness
Soft
Enhances red and weakens
Hue
green.
Colour Temperature
Contrast Mode
Back Light
Darkens the screen.
Reset
(off the function)
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Colour
Colour Temp. Adjustment
Amplitude Brighter scene is decreased in
Red
reddish colour.
Brighter scene is decreased in
Green
greenish colour.
Brighter scene is decreased in
Blue
bluish colour.
Cut Off Dark scene is decreased in
Red
reddish colour.
Dark scene is decreased in
Green
greenish colour.
Dark scene is decreased in
Blue
bluish colour.
36
Dynamic Natural
Broadens the gap between
brightness and darkness.
Black is set off for increased
overall brightness.
Increase colour intensity.
Sharp
Enhances green and weakens
red.
Cool Normal Warm
Normal Auto
Brightens the screen.
(waiting to reset)
Off Low
Off On
Off On
Off Low Middle
Off On
Off On
Brighter scene is increased in
reddish colour.
Brighter scene is increased in
greenish colour.
Brighter scene is increased in
bluish colour.
Dark scene is increased in
reddish colour.
Dark scene is increased in
greenish colour.
Dark scene is increased in bluish
colour.
Dynamic: This setting is best for very bright ambient lighting.
Cinema
Natural: This setting is for normal lighting conditions.
Cinema: This setting is best for watching movie.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
[+31]. The colour for [+32] to [+40] numbers will change from green to
magenta. This special mode is better for dark scenes.
For normal viewing we recommend that the Contrast is set to [+31].
Adjust to preference.
Adjust to preference.
Shift to the minus (-) side for a softer effect and plus (+) for sharper picture.
This is not available to adjust when receiving PAL/SECAM signal.
Then the character will be greyed out.
Adjust for the most realistic skin colour.
Black/White
Normally set to Cool.
Dynamic: Emphasizes the differences between video shadings to improve
Dynamic
Normal: The gradation of an image is reproduced as faithfully as possible.
Auto: Detects image brightness and automatically adjusts for natural
brightness.
Adjust to preference (for the maximum visibility).
The original factory settings for the items of this Menu page can be restored
by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce noise.
High
Performs colour signal noise reduction. Turn up to reduce noise. And it will
be fixed as Off only when selecting DVI-STB mode.
On: Automatically detects the movie film material and faithfully reproduces
the original film image.
Off: Set to OFF when switching between images does not appear natural.
This is available only when receiving a PAL composite signal. Turn On to
reduce the discolorations in fine picture detail and provides purer colour.
Adjusts the sharpness of the picture signal.
High
Adjusts the sharpness of the colour signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/S.Video signal.
This monitors and adjusts the colour to maintain constant colour levels. It
also maintains natural flesh tones whilst preserving fidelity of background
colours.
Turn On when you wish to change colour temperature depending on the
user's preference.
Adjust colour temperature depending on the user's preference. These
settings are independently stored in each of the 4 Colour Temperature
modes.
Setup hint
the feeling of contrast.
SELECT button at