General Connection And Applications; Connecting The Monitor To The Computer - Hitachi CML200UXWB Service Manual

5. General Connection and Applications

Procedures for installing and using this CML171SX LCD monitor are described as
below.

5.1 Connecting the monitor to the computer

1) Place the display on a flat, sturdy surface. Choose an area free from excessive heat,
moisture, and sunlight. Avoid possible sources of electromagnetic interference, such as
transformers, motors, and fluorescent lighting.
2) Locate the AC power adapter with attached power cable and then connect the power cable
to the power jack on the back of the display. Plug the three-prong power cord into a power
outlet, and plug the other end into the AC power adapter. The three-prong power cord is a
shielded type and is provided as a safety precautions to ensure proper electrical grounding.
Plug the D-SUB 15-pin analog signal cable into the Analog Input port or DVD-D 25 pin
signal cable into the Digital Input pory on the back of the display. Connect the other end of
the signal cable into your computer's VGA output port. The assignment of the pins of the
connector is as follows:
12