INSTALLATION INSTRUCTIONS (continued)
Connection to an Audio Visual Device (continued)
Precautions when connecting the antenna
Please use a coaxial cable which is free from interference to connect the antenna. Avoid using a parallel flat feeder wire as interference
•
may occur, causing reception to be unstable and stripe noise to appear on the screen.
Avoid using indoor antenna as this may be affected by interference. Please use CATV net or outdoor antenna.
•
Keep the power cord as far away from the antenna wire as possible.
•
If there are noise appearance in the picture of VHF-Low band channel, please use the double-shielded cable (not provided) for RF
LEADS to reduce the noise.
14