Hitachi 32LD7200 User Manual page 22

OPERATING INSTRUCTIONS (continued)
Size Switching (continued)
When you want to
Play a 14:9 image in a 16:9 screen expanded
vertically and squeezed horizontally.
Play a 14:9 image expanded vertically on the
16:9 screen.
Vertical picture position can be adjusted for [Panoramic], [Zoom], [C14:9L] and [14:9Zoom] mode as follows.
1. Press ZOOM button and
2. Position display will appear.
3. Adjustment range of each picture size are as shown below.
[Panoramic]
[Zoom]
[C14:9L] and [14:9Zoom]
4. When 1080i/60 component signal is received, vertical position can be adjusted only one step up. (The range: 0 to +1)
ATTENTION
Using a wide-screen monitor
This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV
•
program, the image would appear different from the original. Take this into consideration when making screen mode choices.
Use of this monitor in its enlarged display mode with the wide feature enabled in coffee shops, hotels and other establishments for
•
commercial or public viewing purposes could infringe on the copyright holder's right protected by Copyright Law.
When a normal 4:3 image is displayed over the entire screen in the Panoramic mode, parts of the periphery of the image may disappear
•
and/or appear distorted in some cases. Use the 4:3 mode to view images, which were created in 4:3 mode.
This mode allows 4:3 content to be viewed without picture distortion.
•
During RGB Input (RGB1 (set to [DVI-PC]) and RGB2 (set to [RGB]))
•
Normal Full Zoom1
Real*
Zoom3 Zoom2
* Real mode gives the image of the same shape as it is displayed on a computer monitor.
This mode is only available for VGA (640 X 480), WVGA (864 X 480),SVGA (800 X 600),XGA (1024 X768) and WXGA (1280 X768).
Display area selection diagram (RGB input)
Resolution Full display
Display Full
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024
(SXGA)
1600 X 1200
(UXGA)
Selected character
1366 X768
(WXGA)
WXGA Type
Processes such as compression (thinning) and expansion are performed for the above signal display. Because of this, there is a
possibility that flicker may become noticeable on Zoom (1 ~ 3) depending on the display contents. If this occurs, turning the Vertical
Filter on 33 can reduce the flicker.
Set the display size to
C14 : 9L
14 : 9Zoom
SELECT buttons during picture size display.
- 12 to + 12
- 31 to + 31
- 16 to + 16
Position + 31
Press
Normal
32
Input signal Display screen
(14:9 signal)
(14:9 signal)
Position - 31
Press
Circular display
Real Zoom1
can't select
Remarks
This mode is provided for the broadcasting
program with WSS code-C14:9L.
This mode is provided for the broadcasting
program with WSS code-14:9 Zoom.
Zoom2 Zoom3
21