Download Print this page

Hitachi 55PD8800TA Service Manual

Hide thumbs

Advertisement

SERVICE MANUAL

LCD
Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful radia-
tion and materials, various measures are provided in this HITACHI display.
Be sure to read cautionary items described in the manual to maintain safety before servicing.
1. Since Panel Module and front Filter are made of glass, handling the broken Module and Filter shall be
taken care suffi ciently in order not to be injured.
2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become suffi ciently
cool.
3. Special care shall be taken to the display area in order not to damage its surface.
4. The Panel Module shall not be touched with bare hand to protect its surface from stains.
5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the dis-
play area of the Panel Module but also a serviceman himself.
6. The Chip Tube of Panel Module (located upper left of the back and surrounded by frame) and fl exible
cables connecting Panel glasses to drive circuit PWBs are very weak, so shall be taken care suffi ciently
not to break. If you break Chip Tube, the Panel doesn't display anything forever.
1. Features --------------------------------------------------3
2. Specifi cations --------------------------------------------4
3. Service point ---------------------------------------------5
4. Component names -------------------------------------6
5. New adoption technology -----------------------------7
6. Adjustment --------------------------------------------- 11
7. Troubleshooting --------------------------------------- 37
8. Self-diagnosis function ------------------------------ 52
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Caution
Service Warning
Contents

Plasma Display

November 2005 Digital Media Division
YK
55PD8800TA(PW3)
37LD8800TA(PW3L)
PDP
9. Basic circuit diagram --------------------------------- 54
10. Printed wiring board diagram ---------------------- 82
11. Block diagram ----------------------------------------- 90
12. Connection diagram --------------------------------- 91
13. Wiring diagram ---------------------------------------- 93
14. Disassembly diagram -------------------------------- 97
15. Replacement parts list ----------------------------- 101
No.022E

Advertisement

loading

  Also See for Hitachi 55PD8800TA

  Related Manuals for Hitachi 55PD8800TA

  Summary of Contents for Hitachi 55PD8800TA

  • Page 1: Table Of Contents

    Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful radia- tion and materials, various measures are provided in this HITACHI display. Be sure to read cautionary items described in the manual to maintain safety before servicing.
  • Page 2 55PD8800/37LD8800 CAUTION FOR SAFETY Please read this page before repair the monitor. This page explains to following items for keep the safety of set and prevent to accident during repair work. We explain by symbol at happen the damage or injury when took wrong repair. Warning This symbol means "possible to die or heavy damage"...
  • Page 3: Features

    55PD8800/37LD8800 PRECAUTIONS How to clean the plasma screen panel of the monitor Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet. To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard objects.
  • Page 4: Specifi Cations

    55PD8800/37LD8800 2. Specifications Approx. 55 inches Approx. 37 inches Display dimensions (1230(H) x 692(V)mm, diagonal 1412mm) (820(H) x 461(V)mm, diagonal 941mm) Panel Resolution 1366(H) x 768(V) pixels 1366(H) x 768(V) pixels including Opional Stand : including Opional Stand : 1510(W) x 933(H) x 450(D)mm 940(W) x 736(H) x 350(D)mm Net dimensions excluding Opional Stand :...
  • Page 5: Service Point

    55PD8800/37LD8800 3. Service points Lead free solder This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C).
  • Page 6: Component Names

    55PD8800/37LD8800 4. Component names [Main unit] Control panel Remote Control Receiver SD MEMORY SD Memory Card Slot CARD Indicating Lamp Sub Power button PUSH-EJECT • The main power switch is located at the back, on the lower surface. Channel UP/▲button Main power switch Channel DOWN/▼button Volume UP...
  • Page 7: New Adoption Technology

    55PD8800/37LD8800 5. New adoption technology [System control micom I001(M30627)] Pin function table PIN NAME FUNCTION Panel: PDP/ LCD VREF (+5.0V) PDP/ LCD +5.0V PDP/ LCD AUDIO_SW1 PDP/ LCD Audio SW1 OSD_DATA PDP/ LCD OSD DATA OSD_CLK PDP/ LCD OSD CLK PDP/ LCD Head Phone Volume HP_VOL...
  • Page 8 55PD8800/37LD8800 PIN NAME Panel: PDP/ LCD FUNCTION CPUGO(PM_CPU) PDP/ LCD PDP Control/Inverter Voltage EPM (FLASH) PDP/ LCD FLASH for Writing VIDEO.DET_1 PDP/ LCD VIDEO Board Detection SCL1 PDP/ LCD I2C To the Side of Main Board FE/MSP3455or MSP3415G/SAA5361 SDA1 PDP/ LCD I2C To the Side of Main Board FE/MSP3455or MSP3415G/SAA5361 HDMI-RESET PDP/ LCD...
  • Page 9 55PD8800/37LD8800 PIN NAME Panel: PDP/ LCD FUNCTION SCL0 PDP/ LCD C To the Side of Main Board (TA1391FG/CXA2069/uPD64015/TB1274AF) SDA0 PDP/ LCD C To the Side of Main Board (TA1391FG/CXA2069/uPD64015/TB1274AF) SCL3(EEPROM) PDP/ LCD C EEPROM SDA3(EEPROM) PDP/ LCD C EEPROM EPGGO PDP/ LCD EPGGO EXT_RESET...
  • Page 10 55PD8800/37LD8800 Block diagram...
  • Page 11: Adjustment

    55PD8800/37LD8800 6. Adjustment ● How to get to Adjustment mode Using the front control buttons with the set turned off (standby) can activate it. Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for more than 5 seconds.
  • Page 12 55PD8800/37LD8800 Service adjustment items by I C-bus control (MAIN Part) Adj. Function Max. Init. Value Device value ADJ. Items Mode PDP LCD 0 SUB_CONTRAST (AV1) Sub Composite mode TB1274 1 SUB_CONTRAST (AV2) Sub Composite mode TB1274 2 SUB_CONTRAST (AV3) Sub Composite mode TB1274 3 SUB_CONTRAST (AV4) Sub Composite mode...
  • Page 13 55PD8800/37LD8800 Adj. Function Max. Init. Value Device value ADJ. Items Mode PDP LCD 60 Vertical DSB coring for B-Y/B, R-Y/R [CVDSBC0] NTSC/PAL/480i/576i/Multi [CVDSBC1] 480p/576p/1080i-50/60/720p 62 Vertical Enhancer CLIP 0:CTI for B-Y/B, R-Y/R [CVECLP0] NTSC/PAL/480i/576i/Multi [CVECLP1] 480p/576p/1080i-50/60/720p 64 Horizontal HPF Peak Frequency Switch for B-Y/B, R-Y/R [CHHPF0] NTSC/PAL/480i/576i/Multi [CHHPF1] 480p/576p/1080i-50/60/720p...
  • Page 14 55PD8800/37LD8800 Adj. Function Max. Init. Value Device value ADJ. Items Mode PDP LCD 120 Y Out Level D/K (6.5) TB1274 121 Y Out Level I (6.0) TB1274 122 Y Out Level L (6.5) TB1274 123 Y Out Level L' (6.5) TB1274 124 Y Out Level (VIDEO) TB1274...
  • Page 15 55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode 180 Sub Contrast 1 Except 15kHz system (15kHz→#262) TA1391FG 181 Sub Contrast 1 TA1391FG 182 Sub Contrast 2 TA1391FG 183 Sub Contrast 2 TA1391FG 184 Sub Color 1 TA1391FG 185 Sub Color 1 TA1391FG 186 Sub Color 2...
  • Page 16: Sub Contrast

    55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 240 CCFMD function RF/VIDEO 241 CCFMD function DSUB-RGB 242 NTSC/EBU(CCFORM) SD(YCbCr)/Scart-RGB 243 NTSC/EBU(CCFORM) HD(YPbPr) 244 NTSC/EBU(CCFORM) DSUB-RGB 245 Correction for Tracking (DCBON) RF/VIDEO-Color Temp. Cool 246 Correction for Tracking (DCBON) RF/VIDEO-Color Temp.
  • Page 17 55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD Except 4.5MHz (Except Dual/ 300 PRE_AM MSP3455G Stereo mode) 301 VOL_SCART1 (D15-D8) 115 115 MSP3455G 302 VOL_SCART1 (D 7-D5) MSP3455G 303 PRE_SCART MSP3455G 304 PRE_FM 4.5MHz(JAPAN) MSP3455G 4.5MHz(Except BTSC-SAP 305 PRE_FM MSP3455G...
  • Page 18: Sub Contrast

    55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 360 Sub Contrast Gain Adjustment SBCNT[5:0] uPD64015 361 Sub Color Cb Gain Adjustment CBGAIN[5:0] uPD64015 362 Sub Color Cr Gain Adjustment CRGAIN[5:0] uPD64015 363 YGC Auto Mode Select YGCAUTO uPD64015 364 YGC Manual Gain Value Setting YGCVAL[6:0] uPD64015...
  • Page 19: Sub Color

    55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 420 Motion Detection Characteristic Test2 SELDYH2F uPD64015 421 Motion Detection Characteristic Test3 SELDCH2F uPD64015 422 Motion Detection Characteristic Test6 SELD1FL uPD64015 423 Color Demodulation Burst Gate Pulse Range Setting BGP2WD[3:0] uPD64015 424 Color Demodulation Burst Gate Pulse Starting Point Setting BGP2ST[3:0] uPD64015...
  • Page 20: Gain

    55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 480i/576i uPD64015 481 Brightness Signal Noise Coring (highpass) YCORH[2:0] NTSC uPD64015 Except NTSC uPD64015 480i/576i uPD64015 484 Color-Difference Signal Noise Coring2 CCORB[3:0] NTSC uPD64015 Except NTSC uPD64015 480i/576i uPD64015 487 Color-Difference Signal Noise Coring2 Control CCOREN NTSC...
  • Page 21 55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 540 Luminance Adjustment (Last 2Bits) BRIGHT[1:0] NTSC mode uPD64015 541 Luminance Adjustment (Last 2Bits) BRIGHT[1:0] Except NTSC mode uPD64015 542 Luminance Adjustment (Last 2Bits) BRIGHT[1:0] 480i/576i uPD64015 543 R-Y Axis Adjustment OFRY[5:0] NTSC uPD64015...
  • Page 22 55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 600 Vertical Sync Signal Pull-in Range Select VLIM uPD64015 601 V Counter Free Run Setting at No Signal Mode NSGVFRUN uPD64015 602 Line Lock Clock Free Run Settng at No Signal Mode NSGFRUN uPD64015 603 Vertical Sync Signal Correction VDCOR uPD64015...
  • Page 23 55PD8800/37LD8800 Adj. Function Max. Init. Value Device value ADJ. Items Mode PDP LCD 660 Y/C timing for M(4.5) system RF-Main uPD64015 661 Y/C timing for (5.5MHz PAL/NTSC4.43) system RF Main uPD64015 662 Y/C timing for (5.5MHz SECAM) system RF Main uPD64015 663 Y/C timing for (6.0MHz PAL/NTSC4.43) system RF Main...
  • Page 24 55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 720 EURO SOUND SYSTEM DK Disable 0:Enable, 1Disable M30627 721 Remote Function available 0:NO, 1:YES M30627 722 Key Function available 0:NO, 1:YES M30627 723 Terminal Mode Function available 0:Not Available, 1:Available RS232C M30627 Set Taiwan/Korea/South America...
  • Page 25 55PD8800/37LD8800 Function Init. Value Adj. Max. Device value ADJ. Items Mode PDP LCD 780 TA1391FG Read Data(06h) TA1391FG 781 TA1391FG Read Data(07h) TA1391FG 782 SiI9021 Read Data SYNC1 : VSYNC/Clock detect/Sync detect 1 HDMI 783 SiI9021 Read Data NHRDL1 : N hardware value 1 Last 7Bits HDMI 784 SiI9021 Read Data NHRDM1 : N hardware value 1 Middle 7Bits HDMI...
  • Page 26 55PD8800/37LD8800 Service adjustment items by I C-bus control (SUB adjust menu) (*The change to a sub menu. press “ok” key after no.819 with a main menu) Function Init. Value Adj. Max. Device ADJ. Items Mode 0 R DRIVE1 [RF/VIDEO/HDMI] COOL PDP/FC 1 G DRIVE1 [RF/VIDEO/HDMI] COOL...
  • Page 27 55PD8800/37LD8800 Function Init. Value Adj. Max. Device ADJ. Items Mode 60 Tint Center (CM) HDMI-YPbPr(1080i-50/60/720p) 61 Tint Center (CM) →HDMI(VGA) 62 Tint Center (CM) 63 Tint Center (CM) DSUB-RGB 64 Center of Sharpness (HV Enhancer Gain for Y) 65 Center of Sharpness (HV Enhancer Gain for Y) VIDEO 66 Center of Sharpness (HV Enhancer Gain for Y) Scart-RGB(50/60Hz)
  • Page 28 55PD8800/37LD8800 Function Init. Value Adj. Max. Device ADJ. Items Mode [YC0R2] 480i/576i/Scart-RGB(50/60Hz) [YC0R3] 480p/576p [YC0R4] 1080i-50/60/720p [YC0R5] NTSC/PAL- S Input [YC0R2'] 125 Coring Amplitude for B-Y/B, R-Y/R [CC0R0] NTSC/PAL/480i/576i/Multi [CC0R1] 480p/576p/1080i-50/60/720p 127 Main YFRNR Input Gain 2 Picture [MYNRG0] Except HD-HD 128 (Sub Side of HD-NTSC, HD-PAL) [MYNRG1] HD-HD...
  • Page 29 55PD8800/37LD8800 Function Init. Value Adj. Max. Device ADJ. Items Mode 180 Horizontal HPF Peak Frequency Switching for Y/G [YHHPF0] NTSC/PAL/480i/576i/Multi [YHHPF1] 480p/576p [YHHPF2] 1080i-50/60/720p 183 Initial value of Contrast (Degradation Reduction1) Extend 1 of Panel Life function PDP/FC 184 Interval time of correction time (Degradation Reduction1) Extend 1 of Panel Life function PDP/FC 185 Additional value of Contrast...
  • Page 30: Factory Reset

    55PD8800/37LD8800 Adj. Function Init. Value Max. Device ADJ. Items Mode 240 dummy240 241 dummy241 242 dummy242 243 dummy243 244 dummy244 245 dummy245 246 dummy246 Factory Reset After all of the adjustments of main chassis are finished, perform FACTORY RESET. Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for more than 5 seconds.
  • Page 31 55PD8800/37LD8800 RGB Amplitude Adjustment (PC D-Sub input) Item Applicable Model All models Preparation Procedure Receive PC signal (VGA [60Hz]), and indicate Input RGB amplitude adjustment signal of VGA Service Adjustment Menu.(Main) (60Hz) into RGB2 [D-sub] terminal. Select No.652 of Service Adjustment Menu. Press [OK] key more than 2 seconds to start the Black pattern: Set pedestal level.
  • Page 32 55PD8800/37LD8800 Video Color Temperature Adjustment (Cool) Item Applicable Model Adjustment Preparations Adjustment Procedures Perform the following adjustment with the remote Set the signal generator output as All White. control Component signal (480i) Set the CRT color analyzer (CA100) at the center Video level : 0.700Vp-p of the panel.
  • Page 33 55PD8800/37LD8800 Video Color Temperature Adjustment (Normal) Item Applicable Model Preparation Procedure (1) Set signal generator output as Perform the following adjustment with the remote All White (Window ratio: 100%). control. (2) Component signal (480i) Set the CRT Color Analyzer (CA-100) at the center Video level : 0.700Vp-p of the panel.
  • Page 34 55PD8800/37LD8800 Video Color Temperature Adjustment (Warm) Item Applicable Model Preparation Procedure (1) Set signal generator output as Perform the following adjustment with the remote All White (Window ratio: 100%). control. (2) Component signal (480i) Set the CRT Color Analyzer (CA100) at the center Video level : 0.700Vp-p of the panel.
  • Page 35 55PD8800/37LD8800 Video Color Temperature Adjustment (B&W) Item Applicable Model Preparation Procedure Set signal generator output as All White Perform the following adjustment with (Window ratio: 100%). the remote control. Component signal (480i) Set the CRT Color Analyzer (CA-100) at Video level : 0.700Vp-p the center of the panel.
  • Page 36 55PD8800/37LD8800 PC Color Temperature Adjustment Item Applicable Model All models Preparations Procedures Perform the following adjustment with the remote Perform after the video color temperature control adjustment. Set into Factory Adjustment mode. Write the results of the video color temp.adjustment (Dynamic/Normal/Warm/B&W) No.
  • Page 37: Troubleshooting

    55PD8800/37LD8800 7. Troubleshooting How to get to Burn-in mode This mode displays the test patterns of some single color raster in turn. These signals are from built-in generator of PDP panel. So it can be presumed that maybe the panel has some trouble when the screen of Burn-in mode is abnormal.
  • Page 38 55PD8800/37LD8800 Power Power cannot be turned on (LED does not light) Is the input voltage applied to Power supply unit ? (CN61 (1),(3)) AC Fuse Filter PWB AC inlet Main switch (SW PWB) Are the voltages applied to CN63(1)pin, CNPPS(3)(5)(8)(9)pins,and CNPPD(1)pin of Power [CN63] (1)+5V supply unit ?
  • Page 39 * Check Power off signal Is the voltege less than 1V applied to PSP4 (4)pin ? Check Power supply unit Sub Power PWB Note 1) table of input/output input/ 37LD8800TA/55PD8800TA output signal name pin No value(V) From/To input PSP2 (9)and(12) +9.9 11.1...
  • Page 40 55PD8800/37LD8800 [PW3 Sound Circuit] No sound of TV (Main) No sound of TV (Sub) Are waveforms at Are waveforms at Check Check pin 2,4,5,6 of PAF1? pin 2,4,5,6 of PAF1? SOUND PWB SOUND PWB Are waveforms at Are waveforms at Check Check pin 45,47 of PFM1(L,R)?
  • Page 41 55PD8800/37LD8800 [PW3 Sound Circuit] No sound of HDMI1 No sound of HDMI2 JF400 JF401 Are waveforms at Check pin 2,4,5,6 of PAF1? SOUND PWB Are waveforms at Check pin 45,47 of PFM1(L,R)? FC PWB Are waveforms at Are waveforms at pin 50,52 of PMF1(L,R)? pin 45,47 of PMF1(L,R)? Check around...
  • Page 42 55PD8800/37LD8800 [PW3 Sound Circuit] No sound of INPUT(HDMI) No sound of INPUT(RGB) AUDIO Stereo mini AUDIO Stereo mini (JF800) (JF801) Are waveforms at Check pin 2,4,5,6 of PAF1? SOUND PWB Check Are waveforms at pin 45,47 of PFM1(L,R)? FC PWB Are waveforms at Are waveforms at pin 45,47 of PMF1(L,R)?
  • Page 43 55PD8800/37LD8800 [PW3 Sound Circuit] No sound of Bridge Media Unit Are waveforms at Check pin 2,4,5,6 of PAF1? SOUND PWB Are waveforms at Check pin 45,47 of PFM1(L,R)? FC PWB Are waveforms at pin 45,47 of PMF1(L,R)? Check around PFM1 Are waveforms at pin 43,45 of I201(L,R)? Check around...
  • Page 44 55PD8800/37LD8800 [PW3 Sound Circuit] Check SOUND PWB Are waveforms at pin 1,2,4,5 of PAS1and pin 1,2,5,6 of PAS2? Check around SPEAKER UNIT Are waveforms at pin 34,35,38,39,46,47, 50,51 of I401? Check around PAS1,PAS2 Is voltage at pin 10,20 of I401 (RESET-N="H")? Check I401...
  • Page 45 55PD8800/37LD8800 [PW3 Sound Circuit] Check FC PWB Are waveforms at pin 2,4,5,6,10,11 of PFA ? Check around PAF1 Are waveforms at pin 31,32,33 of I600? Check around PFA1 Are waveforms at pin 29,38,40 of I600? Check I600 Are waveforms at pin 10,11,12 of IC803? Check around I600...
  • Page 46 55PD8800/37LD8800...
  • Page 47 55PD8800/37LD8800...
  • Page 48 55PD8800/37LD8800...
  • Page 49 55PD8800/37LD8800...
  • Page 50 55PD8800/37LD8800 Teletext [Main PWB Circuit] No Teletext Yes(Sub picture) Are waveform at Sub picture? TP608(Y), TP609(Cb), and (TV+Text) TP610(Cr)? Check FC PWB (Signal Are waveform at Are waveforms at TP605(Y), TP606(Cb), and 64pin(Y), 62pin(Cb), and TP607(Cr)? 60pin(Cr) of I601? Check FC PWB Check Q604, Q605, Q606 Are waveforms at Are waveforms at...
  • Page 51 55PD8800/37LD8800 37LD8800TA Panel Module No Picture or Abnormal display BackLight Lights on? Check Pin 25~28 of P600 of Power Board Check Pin 1~5, 12 of CNLD2, CNLD3 of Pin 25~28 : 12 [V] Power Board Power board Panel Module or FC Board Pin 1~5 : 24 [V] Pin 12 : 5 [V] Inverter Unit...
  • Page 52: Self-Diagnosis Function

    55PD8800/37LD8800 8. Self-Diagnosis Function (PDP only) This chassis has 2 modes of self-diagnosis function. (1) PDP panel check mode: It indicates the one latest record of the PDP panel failure with blinking of the power indication light (LED). (2) Signal circuit check mode: It indicates the check result on some points of the signal circuit and the history of them with On-Screen Display (OSD).
  • Page 53 55PD8800/37LD8800 Signal circuit self-diagnosis function This function is for the failure of the signal circuit, for example the phenomenon as below: "Sometimes power turns off abnormally." "Sometimes picture disappears abnormally." To enter to this Self-Diagnosis mode, follow the next steps: Preparation: 1) The Power Cord should be connected to AC line and the Main Power switch should be turned on.
  • Page 54: Basic Circuit Diagram

    55PD8800/37LD8800 9. Basic circuit diagram Waveform I201(MAIN.V)(44) PIN I501 YIN(S-VIDEO)(44) PIN I501 YIN(3D)(5) PIN I501 CIN(S-VIDEO)(43) PIN I201(SUB.V)(53) PIN 2Vp-p 1.0Vp-p 0.3Vp-p TP65(MY) TP66(MPB) I501 CIN(3D)(7) PIN TP68(SY) TP69(SPB) 1. 2Vp-p 1.4Vp-p 0.3Vp-p TP67(MPR) TP61(MH) TP62(MV) TP6A(SPR) TP63(SH) TP64(SV) 5.0 Vp-p 1.
  • Page 55 55PD8800/37LD8800 Basic circuit diagram list PWB assembly MAIN 1 ............57 PWB assembly MAIN 2 ............58 PWB assembly MAIN 3 ............59 PWB assembly MAIN 4 ............60 PWB assembly MAIN 5 ............61 PWB assembly LED PDP ............62 PWB assembly LED LCD ............
  • Page 56 55PD8800/37LD8800 MEMO...
  • Page 57 55PD8800/37LD8800 PWB assembly MAIN 1 (PW3)
  • Page 58 55PD8800/37LD8800 PWB assembly MAIN 2 (PW3)
  • Page 59 55PD8800/37LD8800 PWB assembly MAIN 3 (PW3)
  • Page 60 55PD8800/37LD8800 PWB assembly MAIN 4 (PW3)
  • Page 61 55PD8800/37LD8800 PWB assembly MAIN 5 (PW3)
  • Page 62 55PD8800/37LD8800 PWB assembly LED PDP (PW3)
  • Page 63 55PD8800/37LD8800 PWB assembly LED LCD (PW3)
  • Page 64 55PD8800/37LD8800 PWB assembly SWIEVEL (PW3)
  • Page 65 55PD8800/37LD8800 PWB assembly FILTER (PW3)
  • Page 66 55PD8800/37LD8800 PWB assembly Sub POWER (PW3)
  • Page 67 55PD8800/37LD8800 PWB assembly TERM (PW3)
  • Page 68 55PD8800/37LD8800 PWB assembly CONTROL (PW3)
  • Page 69 55PD8800/37LD8800 PWB assembly SENSOR (PW3)
  • Page 70 55PD8800/37LD8800 PWB assembly SOUND (PW3)
  • Page 71 55PD8800/37LD8800 PWB assembly SW (PW3)
  • Page 72 55PD8800/37LD8800 PWB assembly FC 1 (PW3)
  • Page 73 55PD8800/37LD8800 PWB assembly FC 2 (PW3)
  • Page 74 55PD8800/37LD8800 PWB assembly FC 3 (PW3)
  • Page 75 55PD8800/37LD8800 PWB assembly FC 4 (PW3)
  • Page 76 55PD8800/37LD8800 PWB assembly FC 5 (PW3)
  • Page 77 55PD8800/37LD8800 PWB assembly FC 6 (PW3)
  • Page 78 55PD8800/37LD8800 PWB assembly FC 7 (PW3)
  • Page 79 55PD8800/37LD8800 PWB assembly FC 8 (PW3)
  • Page 80 55PD8800/37LD8800 PWB assembly FC 9 (PW3)
  • Page 81 55PD8800/37LD8800 PWB assembly FC 10 (PW3)
  • Page 82: Printed Wiring Board Diagram

    55PD8800/37LD8800 10. Printed wiring board diagram MAIN board ( side-A ) LED PDP board ( side-A ) LED LCD board ( side-A ) SWIVEL board ( side-A ) MAIN board LED PDP board SWIVEL board LED LCD board...
  • Page 83 55PD8800/37LD8800 MAIN board ( side-B ) LED PDP board ( side-B ) LED LCD board ( side-B ) SWIVEL board ( side-B ) MAIN board SWIVEL board LED PDP board LED LCD board...
  • Page 84 55PD8800/37LD8800 MAIN / LED PDP / LED LCD / SWIVEL board Mainly chip parts reference table ( side-A ) ( side-B ) CIR.No. Position CIR.No. Position CIR.No. Position CIR.No. Position CIR.No. Position CIR.No. Position CIR.No. Position DLL1 TP222 D101 L102 PLP1 TP101 X208...
  • Page 85 55PD8800/37LD8800 FC board ( side-A ) Mainly chip parts reference table CIR.No. Position CIR.No. Position D100 L404 D101 L405 D200A L406 D400 L407 D401 L410 D402 L500 D404 L501 D407 L502 D408 L503 D409 L504 D500 L600 D501 L601 D502 L800 D503 L802...
  • Page 86 55PD8800/37LD8800 FC board ( side-B ) Mainly chip parts reference table CIR.No. Position CIR.No. Position D102 L505 D103 L700 D201A L801 D202A Q100 D203A Q101 D403 Q102 D405 Q103 D406 Q104 D900 Q105 IC102 Q106 IC103 Q201D IC104 Q202A IC105 Q203A IC201D Q204A...
  • Page 87 55PD8800/37LD8800 AUDIO / CONTROL / SW board ( side-A ) Mainly chip parts reference table AUDIO board AUDIO board CONTROL board Cir.No. Position Cir.No. Position Cir.No. Position D401 L401 ICC1 D402 L402 ICC2 D403 L407 ICC3 D404 L408 JCC1 D405 L409 KIKU1C D406...
  • Page 88 55PD8800/37LD8800 AUDIO / CONTROL / SW board ( side-B ) AUDIO board SW board CONTROL board Mainly chip parts reference table Cir.No. Position TPC_CLK TPC_CMD TPC_CS TPC_DAT0 TPC_DET...
  • Page 89 55PD8800/37LD8800 FILTER board for 55PD8800 FILTER board for 37LDPD8800 SUB POWER board TERM board...
  • Page 90: Block Diagram

    55PD8800/37LD8800 11. Block diagram...
  • Page 91: Connection Diagram

    55PD8800/37LD8800 12. Connection diagram Connection diagram 1/2 to connection diagram 2/2...
  • Page 92 55PD8800/37LD8800 Connection diagram 2/2 to connection diagram 1/2...
  • Page 93: Wiring Diagram

    55PD8800/37LD8800 13. Wiring diagram 55PD8800 (1/2) ECN64 CN21 NVS6 ECN68 NVS2 Logic PWB P301 P701 P501 ESP2 PAS1 NVS3 PAF1 Ferrite core PAS2 Power Unit PWB with lead Ferrite core EAJ1 with lead ESP3 PAJ1 #W003 NVS8 PJA1 Ferrite core CN61 NVS7 PSP2...
  • Page 94 55PD8800/37LD8800 55PD8800 (2/2) AC INLET electrode side. Fasten connctor with lock : to PFM1 (FC PWB) to power PWB E902 Connect it completely to be locked. to B.M Disconnect it pushing the button to release the lock. to PJB1 to CN63 AC INLET white View...
  • Page 95 55PD8800/37LD8800 37LD8800(1/2) AUDIO PAS1 E004 PAS2 P301 P701 P501 CNLD2 Ferrite core CNLD3 with lead with lead Caution:Do not insert in CNLD1. PAJ1 CNPPD CNPPS NVS5 Power Unit PWB EAJ1 ESP3 Power ESP2 TO PANEL EPU1 E001 NVS8 NVS3 EFV1 TO LOGIC TO INVERTER E801...
  • Page 96 55PD8800/37LD8800 37LD8800 (2/2) to power PWB to B.M to PSP4 to CNPPL to CN63 to Sub Pawer PWB E001 to PJB1 Ferrite core with lead E004 to PJM1 to PJF1 to PJF2 EPU1 to PAF1 electrode side. to PAS1 Audio PWB PMF1 (MAIN PWB) to PAS2 PFJ1 P301...
  • Page 97: Disassembly Diagram

    55PD8800/37LD8800 14. Disassembly diagram [ 55PD8800 ] code Material Acrylonitrile Butadine Styrene Steel PolyStyrene #0800 PC+ABS PolyCarbonate + Acrylonitrile Butadine Styrene Aluminium #9203 #9201 #9205 #200L (ABS) #110A (AL) #203 #142 #200C #205 #303 #124 #114 #118 #200R #311 #142 (ABS) #128 #303...
  • Page 98 55PD8800/37LD8800 - BACK COVER - #412 #412 (ii) (ii) (ii) (ii) [ 37LD8800 ] (ii) (ii) #408 (PMMA+ABS) (ii)x30 (jj) (jj) (ii) (ii) (ii) (ii) (jj) (jj) #410 (jj)x4 (ii) (ii) #130 (ii) (ii) #144 (ii) (ii) (ii) (ii) (ii) (ii) <...
  • Page 99 55PD8800/37LD8800 Panel Module 55PD8800TA Remove these holders before replacing PDP module. Add these holders before packing PDP module.
  • Page 100 55PD8800/37LD8800 Panel Module 37LD8800TA Spare Part Name Spare Part No. Panel Module DD00801 Inverter Unit TS06372...
  • Page 101: Replacement Parts List

    55PD8800/37LD8800 15. Replacement Parts list • 55PD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. NOTE : This parts list is applied to the products mode in Japan.
  • Page 102 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 103 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 104 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 105 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 106 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 107 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 108 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 109 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 110 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 111 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 112 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 113 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 114 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 115 55PD8800/37LD8800 • 37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. NOTE : This parts list is applied to the products mode in Japan.
  • Page 116 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 117 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 118 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 119 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 120 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 121 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 122 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 123 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL PART SYMBOL PART...
  • Page 124 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 125 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 126 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 127 55PD8800/37LD8800 PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components,read carefully,the CAUTION FOR SAFETY of this Service Manual. Don't degrade the safety of the receiver through improper servicing. SYMBOL SYMBOL PART NO.
  • Page 128 55PD8800 YK No.022E Digital Media Division 37LD8800 QR66412 Printed in Japan (JE)

This manual is also suitable for:

37ld8800ta55pd8800tapw337ld8800tapw3l