Motorola AP-51XX Product Reference Manual page 483

AP51xx>admin(system.aap-setup)>show
Description:
Displays the access point's Adaptive AP configuration.
Syntax:
show Displays the access point's Adaptive AP configuration.
Example:
admin(system.aap-setup)>show
Auto Discovery Mode
Switch Interface
Switch Name
Static IP Port
Static IP Address
IP Address 1
IP Address 2
IP Address 3
IP Address 4
IP Address 5
IP Address 6
IP Address 7
IP Address 8
IP Address 9
IP Address 10
IP Address 11
IP Address 12
Tunnel to Switch
AC Keepalive
Current Switch
AP Run Mode
AP Run State
admin(system.aap-setup)>
NOTE The access point CLI is only the only AP interface that displays the adaptive AP's adoption status and AP
run state. This information does not appear within the Adaptive AP Setup screen.
For information on configuring adaptive AP using the applet (GUI), see
For an overview of adaptive AP functionality and its implications, see
: disable
: lan1
: greg
: 24576
:
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: disable
: 5
: 157.235.22.11
: TBD
: AAP not adopted
Adaptive AP Setup on page
Adaptive AP on page 10-1.
4-6.
8-149