Table of Contents
Advertisement
4-28
AP-51xx Access Point Product Reference Guide
Passwords
Access
4. Specify the users who can read and optionally modify the SNMP-capable client.
SNMP Access Control Click the
5. If configuring SNMP v3 user definitions, set the SNMP v3 engine ID.
AP-51xx SNMP v3
Engine ID
6. Click
Apply
screen without clicking the Apply button results in all changes to the screen being lost.
Select
Passwords
specifying authentication and password settings for an SNMP v3
user. The maximum password length is 11 characters. Use the
Authentication Algorithm
SHA1
as the authentication algorithm. Use the Privacy Algorithm
drop-down menu to define an algorithm of
When entering the same username on the
SNMP Access
page overwrites the password entered on the SNMP Access page.
To avoid this problem, enter the same password on both pages.
Use the
Access
read/write (RW) access for a user. Read-only access permits a user
access point
to retrieve
allows a user to modify
SNMP Access Control
Access Control
SNMP-generated information and potentially modify related
settings from an SNMP-capable client.
The SNMP Access Control screen's Access Control List (ACL) uses
Internet Protocol (IP) addresses to restrict access to the AP's SNMP
interface. The ACL applies to both SNMP v3 user definitions and
SNMP v1/v2c community definitions.
For detailed instructions of configuring SNMP user access and
modification privileges, see
page
4-29.
The access point
v3 Engine ID for the access point. This ID is used in SNMP v3 as the
source for a trap, response or report. It is also used as the
destination ID when sending get, getnext, getbulk, set or inform
commands.
to save any changes to the SNMP Access screen. Navigating away from the
to display the
Password Settings
drop-down menu to specify
screens, the password entered on the SNMP Traps
pull-down list to specify read-only (R) access or
information, while read/write access
access point
settings.
button to display the
screen for specifying which users can read
Configuring SNMP Access Control on
SNMP v3 Engine ID
field lists the unique SNMP
screen for
MD5
or
DES
or AES-128bit.
SNMP Traps
and
SNMP
Advertisement
Table of Contents
