Table of Contents
Advertisement
2. Highlight an MU from within the
The target MU begins scanning for rogue devices using the detection parameters defined
within the Rogue AP Detection screen. To modify the detection parameters, see
Rogue AP Detection on page
Those devices detected as rogue APs display within the
displayed AP MAC, ESSID and RSSI values to determine the device listed in the table is truly
a rogue device or one inadvertently detected as a rogue AP.
3. If necessary, highlight an individual MU from within the Scan Result field and click the
to Allowed AP List
APs
screen.
4. Additionally, if necessary, click the
device within the Scan Result table into the Allowed APs table within the
screen. Only use this option if you are sure all of the devices detected and displayed within
the Scan Results table are non-hostile APs.
Rogue AP enabled MUs
6-55.
button to move the AP into the Allowed APs table within the
Add All to Allowed APs List
Configuring Access Point Security
field and click the scan button.
Scan Result
table. Use the
button to move every
Active APs
6-63
Configuring
Add
Active
Advertisement
Table of Contents
